厂家批发905智能液晶LCD显示充电器可

给力源智能快速充电器

产品型号:GLE-905

产品性能:

充电器可充2个AA/AAA镍氢或镍镉可充电池；恒压小电流充电模式，将提高电池的使用寿命；

AA/AAA电池采用每槽独立充电方式，对应LED充电指示。

产品参数：

输入： 110V/220V AC， 50/60Hz 50mA

输出： 1.2VDC*2 150mA，

空载功耗： 1.5W MAX；

满载功耗：3.5W MAX；

电池充饱率： ≥80%；

工作温度：0℃～＋40℃

储藏温度：-20℃～＋65℃

外形结构尺寸：68.4*108*29mm (长*宽*高)

重量：110g(不包含电池)Product featuresa) Can charge 1-4 pcs AA or 1-2pcs AAA/ Ni-Mh / Ni-CD rechargeable batteries. LCD shows total process of charging. With nice appearance.

b) Microcomputer IC controls charging process: -ΔVintelligence technique fast cuts off charging, and changes into trickle current charging automatically. Make sure the battery is fully charged and won’t over charge.

c) Over current protection: constant current could avoid bad effect caused by rebounding current and make sure safety.

d) Timer controls strictly the longest time of charging. Make sure safety as battery is fully charged (ratio of chargingsufficiency of one battery≥80%)

e) Temperature protection: (open if ≥60℃) stop charging automatically if the temperature of charger or battery gets too high when charging.

f) Can identify automatically: through microcomputer IC to distinquish non-rechargeable battery, short-circuit battery and deficient rechargeable battery, and then does not charge these batteries to make sure safety.

g) Short circuit protect: can prevent from short circuit when positive pole connects negative one.

h) Can refresh battery: if the voltage of battery is too low (0-0.9V), the charger can refresh battery itself.

i) Discharge function,it can refresh the battery and reduce the memory effect.

j) DC power input, convenient for using in room and car.

3. Electric parameter

1、Input：DC:12V---24 V 800mAh；

2、Output：1.2V DC 2000mA

3. Adaptor specification: Input:100-240V AC Output:12V DC 800mA

4、Consume when unloading battery：1W MAX；

5、Consume when all channels loading batteries：10W MAX；

6、Chargingsufficiency of battery：≥80%；

4. Environment condition

1、Using environment: temperature: 0-35℃ humidity: ≤95％

2、Storage environment: temperature: -25～+60℃ humidity: ≤85％

3、Self environment when working: Surface temperature of charger when charging: ≤60℃，Surface temperature of battery when charging:≤60℃。

5. Safety spec

Accord with safety standard: CE(as the adaptor passed CE)

6. PropertyHigh temperature test: testing temperature is 65℃±2℃. Product is without packing, lasting time is 5 hours. Then put it under normal temperature until return to normal. Retest the property, all goes well.Low temperature test: testing temperature is－20℃±3℃. Product is without packing, lasting time is 8 hours. Then put it under normal temperature until return to normal. Retest the property, all goes well.Constant temperature and humidity test: testing temperature is 40℃±2℃, humidity is 90%～95%. Product is without packing, lasting time is 48 hours. Then put it under normal temperature and humidity until return to normal. Retest the property, all goes well.Vibration test: Frequency is10～55HZ, swing is 0.35mm, To every direction 10 cycles. Then put it under normal condition until return to normal. Retest the property, all goes wel