梅特勒半微量天平 MS105 山西梅特勒电子天平 太原电子天平梅特勒

规格 - MS105 半微量天平

Limit values Maximum capacity 120 gReadability 0.01 mgRepeatability (at nominal load)1) 0.04 mg (100 g)Repeatability (at low load)1) 0.02 mg (20g)Linearity deviation 0.1 mgSensitivity offset2) 0.4 mg (100 g) Typical values Repeatability (at nominal load)1) 0.03 mg (100 g)Repeatability (at low load)1) 0.015 mg (20g)Minimum weight (according to USP) 45 mgMinimum weight (@U=1%, 2 sd) 3 mgSettling time 8 sSensitivity offset2) 0.3 mg (100 g) Dimensions Weighing pan dimensions (mm) ø 80Balance dimensions LxWxH (mm) 358x247x331

1)Standard deviation (sd)

2)Stability of sensitivity with FACT self-adjustment switched on

Features and Benefits

Precise Results

The METTLER TOLEDO HRT (HiRes Technology) includes two built-in weights. Together with FACT (Fully Automatic Calibration Technology), this allows the balance to automatically perform adjustment and linearization.

Efficient Handling

Reduce the number of movements needed for every weighing. Open the draft shield ErgoDoor with one hand and simultaneously place the weighing sample with your other hand.

Space Saving

Save working space thanks to split draft shield doors that do not project beyond the balance, and sideways mounted connectors at the back of the balance.

Easy Cleaning

Cleaning has never been this easy: dismantle the QuickLock draft shield in a few short steps, then wash all glass panels and the drip tray in the dishwasher.

Standard Features

HCD (High Contrast Display)

FACT fully automatic time and temperature-controlled internal adjustment

Protective cover (terminal)

Protective cover

Below weighing hook for weighing below the balance

HRT weighing cell (HiRes Technology)

Overload Protection

Built in Date and Time function

SmartTrac shows the entire weighing range

Programmable 3 SmartKeys for shortcut access to applications

Protection of main balance configuration

All models offer

Weighing in 16 different unitsTaring over the entire weighing rangeBe adapted to the environmentApplications like Piece counting, Percent weighing, Free factor, Statistics, Formulation, Totaling Working in different languages: German, English, French, Spanish, Italian, Polish, Czech