HI-2200美国Holaday电场强度测试仪

HI-2200美国Holaday电场强度测试仪详细参数 ：HI-2200射频电磁辐射分析仪

美国Holaday公司生产的射频电磁辐射剖析仪HI-2200是一套操作简略、应用便利的电磁测量体系。它小巧轻便，可手持，并不易受测量场合的影响, 例如在塔顶等地位。HI-2200显示实时和空间的平均值。它的特色还包含数据记载容量大，应用者可以选择读数单位，调剂报警范畴和RS-232数据界面。

HI-2200配有射频电场探头E100, 频率范畴从100 kHz到5 GHz，大动态测量范畴0.3～800 V/m。

可选择的磁场探头笼罩频率范畴300 kHz～30 MHz 或5 MHz～300 MHz。所有的探头可直接与HI-2200的读出模块衔接，轻松应用。

HI-2200以其良好的敏锐度，大动态的测量范畴，便利适用的设计理念完整合适于下列范畴的利用普及。

利用范畴：

·环境电磁辐射监测

·移动通信、广播电视等单位的电磁辐射监测

·工作场合的电磁场安全监测

·无线电管理部门

·国防电子装备的电磁安全检测

·航空航天装备电磁环境监测

·机场雷达电磁环境的安全监测

·EMC等电磁兼容测试范畴

·相干院所及高校的EMF研讨

特色：

·操作简略

·测试精度高

·轻便

·65,000 个数据记载

·空间平均功效

·动态范畴广

探头规格

型号传感器类型探测频率范围动态范围E100电场无方向性100 kHz – 5 GHz0.3 -800 V/m (Single Range)H200磁场无方向性5 MHz - 300 MHz30 mA/m - 10 A/m (Single Range)H210磁场无方向性300 kHz -30 MHz0.3 - 30 A/m (Single Range)

机械规格型号操作温度主机尺寸探头高重量HI-2200-10℃ to 50℃85mm×160mm×30mm260mm0.6kgKey Features:

One Hand Operation Broad Frequency Range Interchangeable Probe Heads Economical Solution to Broadcast/Telecom Safety Monitoring Needs & Environmental Monitoring Fitted Carrying Case Handstrap & Safety Lanyard Mount Small/Lightweight for minimal field perturbance Optional Fiber Optic Link A simple solution for basic RF safety measurements, the HI-2200 RF Survey Meter provides a compact measurement system including interchangeable probes. The HI-2200 System is a lightweight, easy to hold instrument for less accessible measurement locations such as towers and ladder access situations. The display module has easy to use Spatial and Temporal Averaging on a large LCD display. Additional features include Data Logging capability, User Selectable Readout Units, and Adjustable Alarm Threshold, and an RS-232 Data Interface.

Mobile Communications: With greater dependence on all forms of electronic communication, the need to monitor personnel exposure is an ongoing concern. The compact size and simple operating controls of the HI-2200 offer the perfect solution for all telecommunications service providers.

Broadcast, Commercial Radio, TV: High power radio and TV transmission facilities are required by government regulators in most countries to limit RF exposure to both the general public and employees. Simple yet accurate field measurement instrumentation is necessary for a safe environment.

Health Care Facilities: Concerns regarding medical personnel exposure and potential electromagnetic interference are more easily addressed with the HI-2200. Safety and biomedical personnel can now have easy access to measurement tools for monitoring RF exposure and equipment interference issues.

Industrial: A safe workplace for employees is an important responsibility for all companies. EMF employee exposure safety guidelines now exist in most countries. IEEE, ICNIRP, and national standards provide guidelines for worker RF exposure. The HI-2200 is a cost effective means of monitoring workplace safety.SpecificationsModel HI-2200 Metering Unit

¼ X 20 Tripod MountHandgrip StrapShoulder HarnessRS-232 Data Interface Cable (9-pin D-sub connector)Data Upload SoftwareUser ManualFitted Carry CaseModel E100 Electric Field ProbeCalibrationTwo Year Warranty OptionsAdditional ProbesOptical Remote Data LinkOptical Cable (up to 100 meters)Probe View II PC SoftwareElectrical Specifications For Field MeterFrequency Range:100 kHz - 5 GHzFrequency Response: (1 MHz - 4 GHz)+/- 1 dBLevel Range:0.3 - 800 V/mOverload:> 1200 V/mSensitivity:0.3 V/mIsotropicity:+/- 0.1 dBResolution:0.01 V/mUser Selectable Units:V/m, A/m, T, mW/cm2Internal Memory:> 65,000 data pointsOperating Time:> 20 hrs; 4-AA BatteriesAveraging Modes:Linear, RMS, Spatial

Electrical Specifications For Additional ProbesModelSensor Detection TypeFrequency RangeDynamic RangeE100E-Field isotropic100 kHz – 5 GHz0.3 – 800 V/mH200H-Field isotropic5 MHz – 300 MHz30 mA/m – 10 A/mH210H-Field isotropic300 kHz – 30 MHz0.3 – 30 A/mC300E-Field % of FCC std100 kHz – 8 GHz< 1% - 999% of FCC stdC310E-Field % of ICNIRP std100 kHz – 8 GHz< 1% - 999% of ICNIRP