供应磨浆机

a.4 磨浆机系列 Grinder Series

设备由水流量计、豆流量控制器、200型磨浆机、豆浆槽、料斗、电器自动控制器等组成。对浸泡后的大豆进行磨碎，浆渣自动分离。

吸豆自动控制

当磨浆机顶部储豆桶大豆存满时，感应器将信号传输给控制器，吸豆泵自动停止工作，当储豆桶内的大豆下落到设定位置时，吸豆泵自动开启工作，使储豆桶内一直保持设定的储豆量，保证了磨浆机连续不断的工作。

豆浆浓度自动控制

不同品种的豆制品，对豆浆的浓度要求也不同，在磨浆时人工操作很难掌握，洛克MJ系统全自动磨浆机，能自动控制水和豆的流量，由此豆浆浓度就能自动控制。根据生产需要可任意设定豆浆浓度。

磨浆自动控制

磨浆机工作或停止，由真空存豆桶的存豆量来控制，避免磨浆机空机运转，对保护磨浆机起到重要作用，这样的动作在整个生产过程中不断重复出现，达到完全自动化控制。

设备从进豆、出豆到磨豆，三道工序全部实行自动控制，使整机工作程序达到了全自动化。

Combined with water gauge、beans flow controller、grinder、soymilk tank、hopper、electric appliance automatic controller etc. After grinding the soaked of soybean, soymilk and residue will be separated automatically.

Automatic control of bean-absorbing

When the beans tank in the grinder top is full, the sensor will transfer the signal to the controller and the bean-absorbing pump will stop working automatically. The bean-absorbing pump will start to work automatically when the beans in the tank fall to the lowest preset location. It makes the bean-preserving bucket keep the preset quantity of bean preserving, thus ensures the consistent work of the soybeans milk maker.

Automatic control of soymilk density

Various of bean products have various requirements on the density of the soymilk. The manual operation is hard to control this during making soymilk. But Luoke MJ system automatic grinder can automatic control the flow of the water and beans, so the density of the soybean milk can be controlled. The soymilk density can be preseted to any value according to the client requirements.

Automatic control of soymilk making

The working or shut down of the grinder is controlled by the preserving quantity of the beans in the barrel, avoiding the grinder run without beans ,it is very important to protect grinder. Such activity will occur repeatedly during the entire procedure of production, so the full automatic control is realized.

From the entrance of beans to the output of beans and to the making of soymilk, the three procedures are controlled automatically, so the full automatic production of the entire machine is realized.

设备由真空吸豆泵、水流量计、豆流量控制器、300型磨浆机、豆浆槽、浆泵等装置组成，设备主要有三套自动控制系统。

吸豆自动控制

当磨浆机顶部储豆桶大豆存满时，感应器将信号传输给控制器，吸豆泵自动停止工作，当储豆桶内的大豆下落到设定位置时，吸豆泵自动开启工作，使储豆桶内一直保持设定的储豆量，保证了磨浆机连续不断的工作。

豆浆浓度自动控制

不同品种的豆制品，对豆浆的浓度要求也不同，在磨浆时人工操作很难掌握，洛克MJ系统全自动磨浆机，能自动控制水和豆的流量，由此豆浆浓度就能自动控制。根据生产需要可任意设定豆浆浓度。

磨浆自动控制

磨浆机工作或停止，由真空存豆桶的存豆量来控制，避免磨浆机空机运转，对保护磨浆机起到重要作用，这样的动作在整个生产过程中不断重复，达到完全自动化控制。

设备从进豆、出豆到磨豆，三道工序全部实行自动控制，使整机工作程序达到了全自动化。

Combined with vacuum bean absorber pump water gauge 、beans flow controller、grinder、soymilk tank、soymilk pump etc. The equipment mainly have three automatic control system.

Automatic control of bean-absorbing

When the beans tank in the grinder top is full, the sensor will transfer the signal to the controller and the bean-absorbing pump will stop working automatically. The bean-absorbing pump will start to work automatically when the beans in the tank fall to the lowest preset location. It makes the bean-preserving bucket keep the preset quantity of bean preserving, thus ensures the consistent work of the soybeans milk maker.

Automatic control of soymilk density

Various of bean products have various requirements on the density of the soymilk. The manual operation is hard to control this during making soymilk. But Luoke MJ system automatic grinder can automatic control the flow of the water and beans, so the density of the soybean milk can be controlled. The soymilk density can be preseted to any value according to the client requirements.

Automatic control of soymilk making

The working or shut down of the grinder is controlled by the preserving quantity of the beans in the barrel, avoiding the grinder run without beans ,it is very important to protect grinder. Such activity will occur repeatedly during the entire procedure of production, so the full automatic control is realized.

From the entrance of beans to the output of beans and to the making of soymilk, the three procedures are controlled automatically, so the full automatic production of the entire machine is realized.

设备由200型自动分离磨浆机、机架组成，对豆渣进行二次、三次研磨及对豆渣进行清洗输送车间外集中处理。

The equipment consist of model 200 automatic separating grinding machine and stander .

It can grind the bean residue again and again. Also it can put the Okara together to clean and disposal them.

胶体磨为湿式物料超微细加工机械，其原理是通过不同几何形状的转子与定子在高速旋转下的相对运动，使被加工物料在自重力、离心力等复合力的作用下，通过其可变环状间隙时，受到强大的剪切力、摩擦力和高频震荡，达到分散、精碎、乳化、均质混合的目的。

The colloid mill machine is an ideal equipments for superfine complex processing of corpuscles. Its principle of operation is by means of relative movement between the different geometric shaped stator and rotor in high revolving speed, material enters the mill due to its deadweight, ambient pressure and centrifugal force. It will come under the action of strong shearing, rubbing , impacting, high frequency vibrational and whirling forces through the variable annular clearance(grinding gap) between rotor and stator. Then material will be effectively dispersed, pulverized, emulsified, homogenized and commixed.