CC2530模块 zigbee模块 R

CC2530 ZIGBEE 无线模块 数传模块 RF模块

·General Description

The VT-CC2530-Z1 RF Module is a low-power, highly integrated 2.4-GHz

transceiver that suitable for systems targeting compliance with worldwide

radio-frequency. It’s a true system-on-chip solution for 2.4-GHz IEEE802.15.4,

ZigBee and RF4CE applications.

·Key Features

Radio

·2.4-GHz IEEE802.15.4 compliant RF transceiver

·Excellent receiver sensitivity and robustness to

Interference, receiver sensitivity reach to -97dBm

·Programmable output power up to 4.5dBm

·Suitable for systems targeting compliance with

worldwide radio-frequency

·Accurate digital RSSI/LQI support

·data rate: 250kBank

·modulation: O-QPSK

8051 MCU

·Powerful five-channel DMA

·128KB in-system programmable flash, customization 32-,64-,256KB

·8KB RAM with retention in all power modes

·CSMA/CA hardware support

·AES security coprocessor

·Battery monitor and temperature sensor

·12-Bit ADC with eight channels and configurable resolution

·Two powerful USARTs with support for several serial protocols

·IEEE 802.15.4 MAC timer, general-purpose timers (One 16-Bit, Two 8-Bit)

·32-kHz sleep timer with capture

·Watchdog timer

·21 general-purpose I/O pins (19× 4 mA, 2×20 mA)

·Hardware debug support

Low Power

·Active-Mode RX (CPU Idle): 24 mA

·Active Mode TX at 1 dBm (CPU Idle): 29 mA

·Power Mode 1 (4 ms Wake-Up): 0.2 mA

·Power Mode 2 (Sleep Timer Running): 1 mA

·Power Mode 3 (External Interrupts): 0.4 mA

·Wide Supply-Voltage Range (2 V–3.6 V)

·Applications

·2.4-GHz IEEE 802.15.4 systems

·RF4CE remote control systems (64-KB flash and higher)

·ZigBee systems (256-KB flash)

·Home/Building automation

·Lighting systems

·Industrial control and monitoring

·Low-Power wireless sensor networks

·Consumer electronics

·Health care

·Electrical Characteristics

Ta = 25°C, VCC = 3.0V

Typically, equipment utilizing this device requires emissions testing and government

approval, which is the responsibility of the equipment manufacture.

TEST CRITERIA &

TEST ITEM REMARKS

REQUIREMENT

Voltage supply 2.0－3.6V DC

Center frequency 2394－2507MHz Programmable

Frequency error ±30KHz

Modulation O-QPSK

Output power ≤4.5dBm Programmable

Receiving sensitivity -97dBm

Receiving current 24mA

Transmitting current 29mA Po=1dBm

Sleep consumption 0.4mA Power Mode 1

Data rate 250kBand typical

Transmit distance 100m At open area

Antenna 50ohm

Store temperature -40－125°C

Operating temperature -40－125 °C

Package size 20.0*28.0mm