广州贝拉电子科技有限公司
主营产品:
2023年08月02日 15:25
品牌 |
贝拉 |
规格 |
79.56.51 |
型号 |
BL- |
品牌/型号 |
贝拉/BL- |
产地 |
中国 |
First, the principle
A collection of "frozen melt fat 40K burst fat" RF dissolving fat "three powerful technology as a whole, in-depth subcutaneous fat cells in the cell vibration and cavitation produced, which refers to vibration have fat cells manufacture of numerous fine vacuum bubbles of these bubbles will then continue to collide with each other, both inside and outside the cell membrane positive and negative uneven limit to the cell membrane, there will be blasting, completely break down and dissolve fat, fiber less cellulite .
Second, the three core technologies
The frozen melt butter: the use of non-invasive treatment method, accurate transmission "Frozen role" to where the accumulation of body fat, targeted to eliminate stubborn fat cells. Boston Massachusetts General Hospital, Harvard Medical School dermatology specialist registration pointed out that fat cells are more susceptible than other organizations around the refrigeration fat cells solidification at a temperature of 4℃, decomposition, and fat cells near other cells to zero before death, and thus can safely eliminate fat cells without damage to the skin and fat cells surrounding tissue. Cavitation break Lipid: under refrigeration, the triglycerides in the fat cells will solidification, then re-solidified fat cells to cavitation broken fat blasting Chance bulk one by one, by the natural decomposition and removal process, after the body normal metabolic processes gently drain away, the thinning of the layer of fat to reduced fat. The negative pressure carve: Finally, with the negative pressure carve the melting away fat location, remodeling lines to reproduce the most beautiful body.
III. Physical picture of the product and accessories
IV. Operation panel diagram and steps
Step 1: Click "frozen lipolysis system" into the "frozen lipolysis system diagram click on the" frozen fat financial strength "to adjust the size of the frozen melt fat, click on the" dual channel freezing switch to adjust the size of the freezing strength. Click STATR "key to enter the working state. Operating time (20 minutes) is required to colloidal operate simultaneously. The operation is completed, click "Back" to return to the main panel. Select the next operating system.
Step 2: Click "the cavitation broken lipid system into the" the cavitation broken lipid system diagram click to adjust the size of the a fat break strength of the cavitation, cavitation fat breaking strength "select" Cavitation fat breaking mode click STATR, key to enter the working state. Operating time (20 minutes) is required to colloidal operate simultaneously. The operation is completed, click "Back" to return to the main panel. Select the next operating system. Negative pressure + light shaping surface
Step 3: Click the "negative pressure + light shaping system" into "negative pressure + light shaping diagram click on the" shock wave intensity adjust the size of the shock wave, click on the "negative pressure" to adjust the size of the negative pressure. Click on "light energy" to adjust the size of the light energy. Click STATR "key to enter the working state. Operating time (20 minutes) is required to colloidal operate simultaneously. The operation is completed, click "Back" to return to the main panel. Select the next operating system.
Special Note: the shock wave and vacuum two functions can not be operated simultaneously, in order to avoid the interference of the machine, the phenomenon of death.
V. Accessories efficacy Description
1. Frozen probe: dual-channel cooling technology, resulting in a strong cold ice dynamics (ice blast), effectively accelerate the aging of the fat cells and abatement 2.40K explosion fat head: 40K shock wave, deep subcutaneous adipose tissue, the effective collapse of more fat while fighting off accumulation of stubborn fat. 3. RF dissolving fat head: the integration of the six-pole RF, vacuum pressure, infrared light three functions into one, pick up and move loose fat through the vacuum pressure, and then through the RF to play a role in the dermis, resulting in thermal promote fat dissolution and differentiation, the last infrared light, the surface of the skin, anti-virus and anti-inflammatory.
VI. The use of accessories and maintenance matters
1. The instrument a total of four main parts (respectively: the frozen probe, two RF fat soluble probe, 40K burst fat probe) each accessory is a sophisticated device, so in the use of time and use, must pay attention to maintenance, in order to avoid shortening of its useful life. Light-light, holding the handle in the use of accessories, we must pay attention, do not arbitrarily carrying output line handling, or likely to cause internal connector accessories loose, resulting in poor contact and short-circuit. 4. Accessories, do not arbitrarily drop it, you should use the cleaning solution with a clean touch dry cloth to carefully clean. 9. Finished the day care, machine accessories recommended surface cleaning treatment with saline or a little detergent, then wipe dry with a clean, dry cloth, put on the rack
VII. Procedure of the instrument
Add water and change the water A. Add water: because the this instrument using a state-of-the-art water cycle dual-channel cooling technology, so in the first operation before using certain to be the instrument itself with the added water system (plus water pipes, add water funnel, plus outlet) to the instrument added to 7 liters of the pure water, B. Changing the water: a month or so, in order to ensure the water cycle cooling system to work better, it is
联系方式