FPC连接器0.5mmFPC连接器1.0mmFPC(图)

产 品 规 格 书

PRODUCT SPECIFICATION

【1】适用范围 SCOPE

本规格书适用于：0.5间距柔性扁平电缆

This specification covers the 0.5mm Pitch FPC/FFC Connectors（series Locking）

【2】产品名称及型号 PRODUCT NAME AND PART NUMBER

产品名称Product Name产品型号Part NumberFFC/FPC扁平电缆

【3】定格 RATINGS

项目 Item规 格 Requirement容许电压

Rated Voltage(MAX)50V[AC/DC(有效值 Virtual value)50Hz]容许电流

Rated Current(MAX)0.4A使用温度范围Ambienttemperature Range-25℃～ +85℃

【4】性能 PERFORMANCE

4.1电气性能 Electrical Performance

项目Item条 件 Test Condition规格Requirement

4.1.1接触电阻

Contact Resistance适合FPC/FFC嵌合；开放电压20mV以下；短路电流10mA的状态下测定。

Mate applicable FPC/FFC and measure by dry circuit，20mV MAX，10mA.≤20 mΩMAX

4.1.2

绝缘电阻

Insulation Resistance适合FPC/FFC嵌合；相邻端子间或端子与地面间加DC 500V下测定。

Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground.500MΩMIN

4.1.3

耐电压

Dielectric适合FPC/FFC嵌合；相邻端子间或端子与地面间加AC 200V（有效值）历时1分钟下测定。

Mate applicable FPC/FFC and apply 200V AC（virtual value）for 1minute between adjacent terminal or ground.无击穿现象

No Breakdown

4.2机械性能 Mechanical Performance项目Item条 件 Test Condition规格Requirement4.2.1锁紧力及拔出力

Locking and Withdrawal Force适合0.3mm厚的FFC；用每分钟25±3mm的速度；平行地插入、锁紧、拔出。

Insert and extract applicable FFC at the speed rate of 25±3mm/minute.锁紧力Locking

1.96*n (N) MAX

拔出力Withdrawal

0.49*n (N) MIN4.2.2端子保持力

Terminal /Housing Retention Force以用每分钟25±3mm的速度平行向外拉

Pull the terminal at the speed rate of 25±3mm per minute3.92N MIN

4.3环境和其他性能 Environmental Performance and Others项目Item条 件 Test Condition规格Requirement

4.3.1重复插拔

Repeated Insertion and Withdrawal无通电状态；以10次/分钟的速度插拔20次

Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute接触抵抗

Contact Resistance60 mΩMAX4.3.2温度上升

Temperature Rise适合FPC/FFC嵌合；容许电流通电，温度测定。（UL 498）

Carrying rated current load.（UL 498）温度上升

Temperature Rise30℃MAX