优势供应三丰表面粗糙度SV-3100S4

1、SV-C3100S4 System(系统)525-421DC-1 SV-C3100S4 Main unit(主机本体) 1 Specifications(性能说明)Common specification(共有性能说明)Drive unit vertical travel range(垂直行程)300mmDrive unit inclination(驱动部倾斜角度)±45°(手动)Z2-axis detection method(Z2轴检测方式ABS光栅尺Z2-axis resolution(Z2轴分辨率) 1μmDrive speed(驱动速度) X-axis 测量时:0.02,0.05,0.1,0.2,0.5,1,2,5mm/s移动时:80mm/s(可手动调节)Z2-axis移动时:20mm/s(可手动调节)Power(电源) 220V 1Phase 50HzSurface roughness measurement specification(表面粗糙度测量功能)Measuring range X-axis 100mm(测量范围) Z1-axis 800μm、80μm、8μmResolution(分辨率) 0.01μm/800μm、0.001μm/80μm、0.0001μm/8μmX-axis drive unit straightness (0.05 L/1000)μm L:测量长度(mm)(X轴驱动部直线度)Measuring force(测量力) 0.75mNThe tip of stylus(测针针尖) 60°圆锥角，针尖半径2μmContour measurement specification(轮廓测量功能)Z1-axis detection method(Z1轴检测方式反射型光栅尺Measuring range X-axis 100mm(测量范围) Z1-axis 50mmX-axis 0.05μmZ1-axis 0.2μmX-axis drive unit straightness 0.8μm/100mm L:测量长度(mm)(X轴驱动部直线度)Accuracy(精度) X-axis ±(1 L/100)μm L:测量长度(mm)Z1-axis ±(2 │4H│/100)μm H:测量高度(±25mm以内)30mNFlattery angle of stylus 向上:77O(视工件表面条件而定)(测针移动角度) 向下:87O(视工件表面条件而定)The tip of stylus(测针针尖) 硬质合金,针尖半径25μm* Inspection is according to Mitutoyo standard(检验标准依照三丰检验标准执行)2、Standard accessories(标准附件)12AAF718 FORMTRACEPAK(in Chinese)(基本通用测量软件) 1 Measuring force(测量力)****** PC Hardware for DUALTRACEPAK(电脑硬件系统) 1 Pentium IV(DELL Optiplex GX320)HDD:80GB RAM:512MBOS Windows XP(in Chinese)17" LCD DisplayHP Color inkjet printer/USB178-396-2 Detector(0.75mN)(探测器) 112AAC731 Roughness standard stylus(60°cone,2μm)(粗糙度标准测针) 112AAC753 Skidless nosepiece(测针保护装置) 1178-601 Roughness specimen(粗糙度标准样片) 1996506 Straight arm(ABH-71)(直型支臂) 1354884 One-side cut stylus(SPH-71)(高单切面测针) 1546-113 Dial tension gage DTG-10N(张力刻度表) 112AAG153 Pin gage unit(销规) 1(校准工具) Reference hemisphere(基准半球) 1611671-021 Gauge block(10mm)(0级量块) 1611672-021 Gauge block(20mm)(0级量块) 1611675-021 Gauge block(50mm)(0级量块) 1