防爆防腐接线箱 防腐接线箱

BXJ8030 防爆防腐接线箱

BXJ8030 Type Explosion-proof corrosion-proof junction box 1、1区、2区危险场所。

2、ⅡA、ⅡB、ⅡC类爆炸性气体环境。

*可根据用户要求做成粉尘防爆。

1、Can be used in Zone 1 and Zone 2 dangerous places.

2、Can be used in ⅡA、ⅡB、ⅡC group explosive atmosphere.

*Can be made dust explosion-proof according to users requiment. 1、可用于380/220V及以下电路中作为连接各种电气设备的

分线、接线用，也可作为自控或通迅的信号电源的连线。

2、外壳采用高强度难燃工程塑料压制而成，外型美观且具

有抗静电耐冲击及热稳定性好又耐腐蚀等优良性能。

3、盖与壳身之间设有密封圈，并用不锈钢螺钉紧固。

4、接线端子可采用压线式或菲尼克斯的增安型专用接线端子。

5、端子数出线口方向及数量，公称直径可任意变化。

6、电缆布线。 1、It is used to sub-connect or connect 380/220V and below electrical circuits,and also applicable to connect supply wire of self-control engineering or communication’s signals.

2、The shell is made of high rigid,flame-proof engineering plastic with beautiful appearance,functions of electrostatic-resistant, impulsion-withstanding,thermal stability and corrosion-proofing.

3、Between cover and shell body is arranged sel washer fastened by stainless screw.

4、Terminal can be selected for line pressed type or pheonix’s special terminal of safety-increased type.

5、Terminal number,direction,nominal diameter may be changable.

6、suitable for cable wiring. 额定电压

Rated voltage

(V)额定电流

Rated current

(A)防护等级

Protection category防爆标志

Explosion-

proofing marker防腐等级

Corrosion-proofing

grade38010,20IP65Exe Ⅱ T6WF2 注：具体外形尺寸根据内装接线端子的数量、

电流大小及其进出口规格、方向等要求进行确定。

Notice:The detailed outline

dimension is made according to

inner-terminal’s number,

current and specification,

dircetion of inlet and outlet.