家居无线遥控开关 澳式遥控插座4+1 remote control switch

该产品套餐是1个无线遥控器+4个无线遥控插座

无线遥控器的使用说明书

功能描述

----------------------------------------------------------------------------------------------------------------------------------------------

该遥控器采用433.92MHZ无线通讯技术，可以远距离遥控插座打开或者关闭电器，关掉像电脑，电视，微波炉，壁炉，或灯具之类的电器设备，节省时间，力气，电能和金钱。遥控插座对于难以到达的桌下或者电视机后面壁炉上面或微波炉上的插座来说非常的方便，而且能保证用电设备在不使用的时候彻底断电，以保证电器的安全性，可避免雷击或线路老化等因数引起的火灾。

使用说明

---------------------------------------------------------------------------------------------------------------------------------------------------

1.先将提供的电池安装到遥控上

2.将插座连接到电源上，插座上的指示灯开始闪烁，开始设置

3.对着插座长按遥控上任意一个ON 开关超过两秒，会看见插座上的指示灯快速闪速后然后变成长亮，表示设置成功

4.连接电器在插座上，按对应的ON/OFF 键控制开关

如何解码

1.对着插座长按ON/OFF超过三秒，插座上的指示灯由快速闪速到一秒钟闪烁一次，表示已经解码成功

2.长按ALL OFF 键超过三秒，插座上的指示灯由快速闪速到一秒钟闪烁一次，表示已经解码成功

产品展示

-------------------------------------------------------------------------------------------------------------------------------------------------

产品细节

---------------------------------------------------------------------------------------------------------------------------------------------------------

remote controlled socket（learning style)

1.Instuction

\on the remote control. open the battery compartment and place the provided battery in the right position

\plug the receiver in a power plug. then LED will light. And LED flashes one time per second.

\press the ON switch(lasting more than 2 seconds)of you choice on the remote control. the receiver will then learn the code. When LED flashes continuously in 2 seconds and go out, it means the receiver learns the code successfully.

\Repeat these last two operations for all receiver selecting a different ON button for each receiver.

\When power cut or pull out the receiver from a power plug. you should repeat all the setting above.

2.Operation

\Plug the device you want to remotely operate in a receiver.

\press the corresponding ON or OFF button of the remote control to operate the plug

\press the direct ON/OFF switch on the receiver to operate the plug.

3.Trouble shooting

\if a receiver does not react to the remote control operation it can be due to :

\\Low battery in the remote control -Replace it

\\Distance too large between the remote control and the receiver

\\The pressing time on the buttons must be at least 2 seconds

4.How to decode

\press ON/OFF switch on receiver and last for 3 seconds. After the LED flashes from quickly to once per second. decoding is successful.

\Press ALL OFF swith on remote control and last for 3 seconds. After the LED flashes from quickly to once per second. decoding is successful.