许昌纳诚电工绝缘材料有限公司
主营产品:
2023年10月10日 10:31
品牌 |
许昌纳诚 |
型号 |
6632DM绝缘纸 |
等级 |
特级 |
厚度 |
0.15-0.50mm(mm) |
加工定制 |
是 |
6632DM绝缘纸
DM 是一种柔软复合材料,由聚酯薄膜单面涂胶粘剂粘合聚酯纤维非织布(无纺布)而成的两层绝缘纸。绝缘等级属于F级155℃。
DM comprise of Polyester film single- faced coating adhesive bonding and non-woven of two layers of insulating paper。
Insulation class belongs to the class F(155℃)。
1 应用提示Application remarks
DM集合了无纺布良好的浸渍性能和聚酯薄膜良好的介电强度,广泛适用电气设备,适用于F级电机的槽间绝缘、匝间绝缘和衬垫绝缘。
DM collection of dipping properties and non-woven polyester film good dielectric strength, widely used electrical equipment, applicable F the slot insulation, electrical insulation and the turn-to-turn liners insulation.
2 技术要求Performance Requirements
1.1 外观Appearance
表面应均匀、无起毛、和无气泡、针孔、皱折及瑕疵之类缺陷
surface of materials is uniformity ,velvet and haven’t air bubble, pinhole, goffer and blemish etc.
1.2 性能要求Performance requirements
表1 DM性能要求 Table 1 The standard values of DM 序号
NO. 指称名称
Properties 单位
Units 指标值
Values 1 标称厚度
Nominal thickness mm 0.17 0.20 0.25 0.30 0.35 2 厚度允差
Thicknessallowed tolerance mm ±0.02 ±0.02 ±0.03 ±0.03 ±0.03 3 标称定量
Nominal grammage g/m2 220 240 300 400 460 4 定量允差
Grammageallowedtolerance g/m2 ±26 ±28 ±36 ±48 ±55 5 薄膜标称厚度
Film nominal thickness um 125 140 190 250 300 6 拉伸强度(纵向)
Tensile strength(MD) N/10mm ≥80 ≥120 ≥150 ≥170 ≥200 7 拉伸强度(横向)
Tensile strength(XD) N/10mm ≥80 ≥105 ≥130 ≥150 ≥180 8 伸长率(纵向)
Elongation(MD) % ≥10 ≥10 ≥10 ≥5 ≥5 9 伸长率(横向)
Elongation(XD) % ≥15 ≥15 ≥15 ≥5 ≥5 10 击穿电压
Electric breakdown voltage KV ≥7 ≥8 ≥10 ≥10 ≥11 11 热态粘结180±2℃ 10Min
Bond strength at 180±2℃ 不分层、不起泡、不流胶
No delamination,no blister,no adhesive flow
联系方式