HOLDTITE耐200高溫瞬間膠

UK HOLDTITE 耐高溫瞬間膠CA200，可耐高溫200度的瞬間膠，業界最強，已經得到客戶認證確認。

TECHNICAL INFORMATION (TDS 40) [table][tr][td] [/td][td] RESIST©200[/td][/tr][tr][td] [/td][td] High Temperature Speciality Cyanoacrylate. [/td][/tr][tr][td] DESCRIPTION Resist© 200 is unmatched in performances when compared to Ethyl, Ethoxy and Methyl Cyanoacrylates where maximum temperature reaches only 120C, with significantly reduced % of ultimate bond strength. Resist© 200 out performs all other Cyanoacrylates for Temperature Resistance. APPLICATIONS Intermittent or constant exposure to elevated temperatures, extremes of temperatures up to 200C. Post curing to an even Higher Strength @ 175C to form Temperature Resistant bonds on most Metals, Rubbers etc. USEFUL HINTS/NOTES Use Resist© 200 to hold components in place on circuit boards where wave soldering temperatures kill other superglues. PROPERTIES When heating up items after bonding, 30 minutes @ 150C above will increase strength by 40% of cold bond strength and influence the products long term resistance to its fullest once cured. INSTRUCTIONS FOR USE Ensure parts are clean, dry and free from oil and grease. PROCEDURE FOR APPLICATION Apply sparingly to one side and hold parts until handling strength is achieved. COMPATIBLE ACCELERATORS/PRIMERS Not recommended, but the following primers such as A021 or Double Strength A113 as accelerators for fillet cure for priming absorbent surfaces will help speed cure the material. REV: 21-09-99 HH[/td][td] TECHNICAL FEATURES Resin…………………………………Allyl 2 Cyanoacrylate Colour……………………………….Clear Cure Speed With Activator……….…Not recommended Cure Speed Without Activator………90°C Shelf Life……………………………12 months @ 20C Specific Gravity……………………..1.06 Max. Operating Temperature……….-30°C to + 200°C CURED PERFORMANCE Fixture Time:……………………….. 温馨提示： 以上是关于HOLDTITE耐200高溫瞬間膠的详细介绍， 产品由东莞市虎门芯恩五金贸易部为您提供，如果您对东莞市虎门芯恩五金贸易部产品信息感兴趣可以 联系供应商 或者让供应商主动联系您 ，您也可以查看更多与HOLDTITE耐200高溫瞬間膠相关的产品！