供应原装乐泰瞬干胶粘剂495 20G

This Technical Data Sheet is valid for LOCTITE®495manufactured from the dates outlined in the

"Manufacturing Date Reference" section.

LOCTITE®495 is a general purpose cyanoacrylate instantadhesive.

Commercial Item Description A-A-3097:

LOCTITE®495 has been qualified to Commercial Item

Description A-A-3097. Note: This is a regional approval.

Please contact your local Technical Service Center for more

information and clarification.

TYPICAL PROPERTIES OF UNCURED MATERIAL

Specific Gravity @ 25 °C 1.1

Viscosity, Cone & Plate, mPa·s (cP):

Temperature: 25 °C, Shear Rate: 3,000 s-120 to 45LMSViscosity, Brookfield - LVF, 25 °C, mPa·s (cP):

Spindle 1, speed 30 rpm, 20 to 60

Flash Point - See SDS

TYPICAL CURING PERFORMANCE

Under normal conditions, the atmospheric moisture initiates the

curing process. Although full functional strength is developed

in a relatively short time, curing continues for at least 24 hours

before full chemical/solvent resistance is developed.

Cure Speed vs. Substrate

The rate of cure will depend on the substrate used. The table

below shows the fixture time achieved on different materials

at 22 °C / 50 % relative humidity. This is defined as the time to

develop a shear strength of 0.1 N/mm².

Fixture Time, seconds:

Mild Steel (degreased) 5 to 10

Aluminum (degreased)