厂家特价供应太阳能组件层压机

供应太阳能组件层压机-秦皇岛鑫美源工贸有限公司

BD—A2全自动油温式层压机1.结构形式：油加热系统、真空系统、主机一体化设计;

2.传送系统：进料台、主机、出料台传送带无限循环工作方式，速度：0~300mm/s任意调整；

3.电源电压：380V/3相/4线，设备功率70KW,正常工作23-25KW;

4.升温速率：常温至135℃需要50~60分钟；

5.真空速率：70L/S，极限真空20Pa；

6.适用范围：有效层压面积2200mm*3600mm，常规210Wp(1650*1030)电池组件4块同时层压；

7.生产能力：单班产能210WP*4块/次*3次/小时*8小时*300天=210WP*21600块=6.048MWP/年；

8.胶板尺寸：5mm*4000mm*2600mm，更换时间：20~30分钟；

9.传热介质：SD320高温导热油，容量：150L，额定工作压力：0.5MPa；

10.开盖方式：气动直起式开盖，开起高度：300mm；

11.设备重量：16.5T；

12.外形尺寸：11000mm*3400mm*1650mmBD—A2全自动油温式层压机1. Structure: oil heating system, vacuum system, the host integration design;

2. Transmission system: the feed table, the host, the endless loop feed conveyor work station, speed: 0 ~ 300mm / s adjustable;

3. Supply voltage: 380V / 3 Phase / 4 wire, equipment, maximum power 70KW, working 23-25KW;

4. Heating rate: room temperature to 135℃need 50 to 60 minutes;

5. Vacuum rate: 70L / S, ultimate vacuum 20Pa;

6. Application: effective lamination area 2200mm * 3600mm, conventional 210Wp (1650 * 1030) cell assembly 4 also laminated;

7. Production capacity: single shift production capacity 210WP * 4 block / times * 3 times / hour * 8 hours * 300 days = 210WP * 21600块= 6.048MWP / year;

8. Sheet size: 5mm * 4000mm * 2600mm, replacement time: 20 to 30 minutes;

9. Heat transfer medium: SD320 high-temperature heat-conducting oil, capacity: 150L, rated working pressure: 0.5MPa;

10. Lid ways: directly from the pneumatic-type openings, the largest since opening height: 300mm;

11. Weight: 16.5T;

12. Overall dimensions:11000mm *3400mm *1650mm