HDH125系列液压分度头 HDH125系列液压分度头

一、特点

1、独特的油路设计，结构简单控制方便，通过单个换向通断即可控制分度头所有动作。

2、速度快、冲击小，60 °分度时完成所有动作仅需1.3秒（20L/min），无分度频率限制。

3、经过渗碳淬火处理的大直径双端齿定位，配合大口径油缸锁紧，精度高、耐用性好，夹紧力大、刚性强。

4、端齿部采用新型防尘圈密封，可有效防止碎屑及冷却液侵入；主轴前端采用大直径轴承支撑，承载力强。

5、通过简单改动调整即可实现6、8、12、24等分间任意转换。

1.This type posses a unique circuit design, a simple structure and easy manipulation. A single on-off switch can control all the movement of dia graph

2.High-speed low- momentum; 60 °needs 1.3 second（20L/min）only to com plete all the action and no restrictions on the indexing frequency.

3.The large-diameter double-side gear dealed by carburizing quenching , accompanying with the large-caliber fuel tank locking possess high-accuracy, durability, and well clamping force and strong rigidity.

4.Using of the new dustproof sealing-ring at the department of gear tooth,which can effectively prevent debris and coolant intrusion; the front-end of the Spindle supported by the large diameter with strong bearing capacity.

5.It can change ealily among the 6,8,12, 24 and etc through simply alter

一、特点

1、独特的油路设计，结构简单控制方便，通过单个换向通断即可控制分度头所有动作。

2、速度快、冲击小，60 °分度时完成所有动作仅需1.3秒（20L/min），无分度频率限制。

3、经过渗碳淬火处理的大直径双端齿定位，配合大口径油缸锁紧，精度高、耐用性好，夹紧力大、刚性强。

4、端齿部采用新型防尘圈密封，可有效防止碎屑及冷却液侵入；主轴前端采用大直径轴承支撑，承载力强。

5、通过简单改动调整即可实现6、8、12、24等分间任意转换。

1.This type posses a unique circuit design, a simple structure and easy manipulation. A single on-off switch can control all the movement of dia graph

2.High-speed low- momentum; 60 °needs 1.3 second（20L/min）only to com plete all the action and no restrictions on the indexing frequency.

3.The large-diameter double-side gear dealed by carburizing quenching , accompanying with the large-caliber fuel tank locking possess high-accuracy, durability, and well clamping force and strong rigidity.

4.Using of the new dustproof sealing-ring at the department of gear tooth,which can effectively prevent debris and coolant intrusion; the front-end of the Spindle supported by the large diameter with strong bearing capacity.

5.It can change ealily among the 6,8,12, 24 and etc through simply alter