上海创益中空玻璃材料有限公司
主营产品:
2023年08月02日 13:46
固化条件 |
室温固化 |
固化时间 |
48(h)h(h) |
产地 |
上海 |
颜色 |
黑色.白色 |
品牌/型号 |
创益隆云斯 |
拉伸强度 |
30(MPa) |
贮存期 |
12个月 |
位移能力 |
60 |
'
创益隆云斯-995单组份硅酮结构胶Chuangyi Longyunsi 998 Single component Silicone Structural Sealant
产品说明
隆云斯995系单组份中性、室温固化、高性能的建筑用结构密封胶对紫外线、阳光、雨水、冰雪臭氧或极高温条件下不会有不良影响,施工能在-10℃至50℃的气温范围内保持本质不变,凝固时间后在-50℃至150℃的温度仍保持弹性,不会硬化破裂和碎裂,执行标准:JC/T882-2001
产品特性
无须打底漆,能在凝固后对大多数建筑材料产生强有力的附着力,但使用表面必须干净,无油污。
优异的耐大气候老化性能
不会对其它材料产生反应或腐蚀作用,可立即使用,不用混合催化剂与其它原料。
主要用途
隆云斯995单组份硅酮结构密封胶主要用于半隐或全隐式幕墙设计,也可以用于玻璃与玻璃之间的对接密封
能与大多数的建筑材料;诸如玻璃、铝材、石材、金属材料,包括大多数的氟碳烤漆材料不需要用底漆就有优越的粘接性。
Product Introduction
Longyunsi 998 is single neutral, room temperature curing, high performance structural sealant for construction,it has no influence in ultraviolet radiation,sun, rain, ice, snow or high temperature. The construction could keep essence unchanged from -10℃ to 50℃, it could still keep flexibility,never vulcanize and fracture after curing time from -50℃ to 150℃.
Executive Standard: JC/T882-2001
Product Characteristics
Don’t need drop priming, it has strong adhesive force to major construction material after curing, but the surface must clean and no oilless.
Outstanding weather and aging performance resistance
It can’t react to other material or rust action, it could use at once, don’t need mix activator or other raw material.
Main Purpose
Longyunsi 998 single component silicone structural sealant can beusedin the structural assembly of construction curtain wall,can be used in major construction material; such as glass, aluminum material, stone material, metal material, including mostfluorocarbonbaking material, don’t need drop priming, it has outstanding cohesiveness.
使用说明
使用前进行粘接材料相容性测试,确认产品与基材能符合施工要求后才能施工。
在需要保护的部位贴上低粘度胶带,在胶尚未硫化前进行修整并除去胶带
切下管口再均匀压下胶枪至接口内。结构胶与接口两边均接触良好。
注意事项
1.未固化的结构胶和结构固化的地过程中都会释放出挥发性物质,长期吸入高浓度的挥发性化合物有损健康,因此工作场所应注意保持良好的通风。
2.未固化的结构胶不宜长时间接触皮肤,如不慎进入眼睛,应立既用大量的清水冲洗,必要时再请医生检查。
颜色及包装
颜色:黑、白、透明或客户要求的其它颜色
软包装590ml复合膜,20支/箱
贮存
贮存于干燥环境及27℃以下以延长产品有效期,保质期12个月
运输方式
本品非危险品,可通过汽车、火车、轮船、飞机等方式运输
Recommendation for Use
Make material compatibility test before use, it could be constructedonly if it is according to the construction requirement.
Paste the low adhesivetapeon protection part: trimming and removeadhesive tapebefore sulfuration of the sealant.
Cut open nozzle, press the glue gun to nozzle, structural sealant is good contact with nozzle.
Attention
1. the non-curing structural sealant could release volatility substance, breathehigh concentrationvolatility compound cuase damage to one’ health in long term,so the working place should keep good ventilation.
2. the non-curing structural sealant can’t contact with skin in long term, If it enter into eyes, it must immediately clean by plentiful of clean water and go to see a doctor.
Color and Package
Color: black,white,transparent,or any other colors that required by customer.
Soft Package: 590ML composite membrane 20 pcs/carton
Storage
Please keep in the place below27℃ to extent the validity period of product, the validity period is 12 months.
Transportation Method
This product is non-dangerous goods, it could be transported by train, vehicle, ship and airplane'
联系方式