HDMI光端机单模单纤带千兆网络数据传输FC，SC接口20KM-80KM

USER MANUAL

Pw-THF103

HDMI Fiber Optic Transmission

1.0 Introduction

2.0 Panel Description

3.0 Function Specification

1.0 Introduction DT100F is a perfect solution for transmitting HDMI audio and video through the fiber, the set of device includes a sender of DT100FT and a receiver of DT100FR. Our products transmit the HD video through gigabits of optical fiber, which making the images clearer as well as the transmission more stable. Also, it can transmit gigabits of Ethernet data while transmitting the HD videos, At the same time, the product has the built-in IR remote control function.

2.0 Panel Description

2.1 Front Panel

HDMI TX HDMI RX HDMI PORT Video Input Video Output IR PORT IR Input IR Output RJ45 Network Data Transmission Fiber Port SC Optic-fiber Data Transmission RESET KEY Hold down the key for 8 seconds after power on, the model will restore default settings

2.2 Back Panel

It contains a100~220v AC plug seat, please plug in the100~220V AC power supply while using it.

Attention：To ensure your safety, please use the our original power cords, and connect to the secure socket correctly.

2.3 Indicator led. Indicator led Status Power Light On The power of the device Status Light On The video device starts up. Flash The video device connected successfully Link act Light On Network Link up Flash Packets of data are transmitting in the indicating port 1000M Light On The indicating port working in the status of 1000M Light Off In the state of 10M or 100M Dpx Light On In the State of full-duplex Light Off In the State of half-duplex

3.0 Function Specification

> HDMI 1.3/HDCP1.1 & 1.2

> Both Optic-fiber transmission and Ethernet Transmission

> Support point-to-point mode, one point-to-many mode and cascaded transmission mode.

> Standard and International 802.3Z gigabit Ethernet standard.

> built-in IR remote control function, you can control the set-top box at the receiving site using the IR remote control.

> Pure hardware design, just plug and play, no need to install extra software. Video Parameter Video Resolution 640X480 @ 60fps 800X600 @ 60fps 1024X600 @ 60fps 1024X768 @ 60fps 1152X864 @ 60fps 1280X600 @ 60fps 1280X720@ 60fps 1280X768@ 60fps 1280X800@ 60fps 1280X960@ 60fps 1280X1024@ 60fps 1440X1050@ 60fps 1440x900 @ 60fps 1600x900 @ 60fps 1660x1200 @ 60fps 1680x1050 @ 60fps 1920x1080 @ 60fps 1920 x1200 @ 60fps Audio 32kHz, 44.1kHz and 48kHz Infrared Support 38KHz; NEC code HDMI Version HDMI 1.3 HDCP Version HDCP 1.2 Fiber Parameter Fiber Interface SC or FC Fiber Standard IEE802.3z/AB 1000Base-T/SX/LX Fiber Type Single mode Center Wavelength 1310 nm Transmission Distance 20KM-80KM(需定制） Min Sending Power -8.0dBm Max Sending Power -3.0dBm Receiving Sensitivity <-21 dBm Allowed Link Loss 13.0 dBm Transmission Rate 1000M Other Parameters Power input AC input: 100V - 240V (50 - 60Hz) Max Power Consumption DT100FT: 5W DT100FR: 5W Operating Temperature/Humidity 0℃ - 70℃ / 10% - 80%RH(no condensation) Storage Temperature/Humidity -10℃ - 80℃/ 5% -90% RH(no condensation)