苏州汉泰思远电子科技有限公司
主营产品:
2023年08月13日 08:42
LOCTITE®Hysol®11C™ is a general purpose adhesive andsealant that bonds, seals, and repairs a wide variety of
materials including metals, most plastics, and wood.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Resin:
Specific Gravity @ 25 °C 1.6
Flash Point - See MSDS
Viscosity, Brookfield - RV, 25 °C, mPa·s (cP):
Spindle 7, speed 10 rpm 140,000 to 330,000
Hardener:
Specific Gravity @ 25 °C 1.67
Flash Point - See MSDS
Viscosity, Brookfield - RV, 25 °C, mPa·s (cP):
Spindle 7, speed 2 rpm 500,000 to 900,000
Mixed:
Pot life 100 grams, @ 25 °C, minutes ≥20LMS
TYPICAL PROPERTIES OF CURED MATERIAL
Cured for 1 hour @ 90 °C
Outgassing Properties:
Total Mass Loss, % 0.47
Collected Volatile Condensable Material, % 0.02
Cured for 2 hours @ 60 °C
Physical Properties:
Shore Hardness, ISO 868, Durometer D ≥65
LMS
Cured for 3 hours @ 120 °C
Physical Properties:
Glass Transition Temperature (Tg) by DSC, °C 114
Cured for 3 days@ 25 °C, tested @ 100 °C
Physical Properties:
Coefficient of Thermal Conductivity, ASTM E 1530,
W/(m·K)
0.75
Cured for 3 days @ 25 °C
Physical Properties:
Coefficient of Thermal Expansion,
ISO 11359-2, K
-1
:
Pre Tg 38×10
-6
Post Tg 134×10
-6
Electrical Properties:
Dielectric Breakdown Strength,
IEC 60243-1, kV/mm
18.5
Dielectric Constant / Dissipation Factor, IEC 60250:
1-kHz 5.0 / 0.05
Volume Resistivity, IEC 60093, Ω·cm 5.0×10
14
Surface Resistivity, IEC 60093, , Ω ≥9.47×10
16
TYPICAL PERFORMANCE OF CURED MATERIAL
Adhesive Properties
Cured for 3 days @ 25 °C
Lap Shear Strength, ISO 4587:
Aluminum (etched):
Tested @ -55 °C N/mm² 7.8
(psi) (1,130)
Tested @ 25 °C N/mm² 16.5
(psi) (2,390)
Tested @ 82 °C N/mm² 15.6
(psi) (2,270)
Tested @ 121 °C N/mm² 10.5
(psi) (1,520)
Tested @ 149 °C N/mm² 4.1
(psi) (600)
联系方式