厂销高温抗氧化、抗氧化合金、锡鎵合金

高温无铅锡镓抗氧化合金操作说明：High temperature alloy lead-free tin gallium antioxidantinstructions: 本公司生产的高温无铅抗氧化合金是配合电子工业的高温程式作业而开设的一种特殊产品。由于耐高温能达到450℃-600℃，对于要求耐高温的电子工业，能达到良好的作业要求，故可以大降低电子工业生产的成本，保证产品的质量。This company produces the high temperature alloy lead-freeantioxidant is cooperating with the high temperature programoperation of the electronic industry and set up a special product.Due to high temperature can reach 450 ℃ to 600 ℃, the electronicsindustry for high temperature resistant, can achieve goodrequirements, so it can reduce the cost of the electronics industryproduction, ensure the quality of the products. 高温无铅抗氧化的加入法：High temperature lead-free antioxidant join method: 将原料配制好，熔解达到制作锡条的要求，温度控制在350℃时,加3‰-7‰的高温无铅抗氧化,再加入0.7‰的普通无铅抗氧化.搅拌均匀,保持温度.Madefrom the raw materials, melting reached the requirements of articletin production, control the temperature of 350 ℃, and the hightemperature of 3 ‰ 7 ‰ lead-free antioxidant, add 0.7 ‰ of regularunleaded antioxidant. Stir well and keep thetemperature. 用小锡炉调温至600℃,加入制作好的锡熔液.开炉加温,在加温的过程中,用温度计检测温度,用割片括炉面并观察炉面的变化,如果未达到要求的温度,变黄或变紫,即高温无铅抗氧化加入不够,应增加温度合金抗氧化.到达标准为止。With a small tin stove temperature to 600 ℃, to make good moltentin. Furnace heating, in the process of heating and temperaturewith a thermometer detection, with slices enclosed furnace face andobservation on the surface of the furnace change, if you do notmeet the requirements of the temperature, yellow or purple, namelyhigh temperature lead-free antioxidant to join is not enough,should increase temperature alloy oxidation. Reach thestandard. 标准的抗氧化，在要求的温度下，括炉面后，应保持境面5-10分钟不氧化。Standard of antioxidant, under the required temperature, includingfurnace face, should maintain the land surface 5-10 minutes withoutoxidation.4． 加入高温合金抗氧化3‰-7‰的比例，要按锡原料的质量而定，不能一概而论，所以3‰-7‰是一个范围，视情况而定Join the high temperature alloy oxidation 3 ‰ 7 ‰ proportion,according to the quality of the tin material, cannot treat as thesame, so 3 ‰ 7 ‰ is a range, as the case may be