路灯透镜 隧道灯透镜 大功率灯透镜

型号：HS-28W路灯透镜

表面:透光

规格:95mm×115mm

发光角度:60*120度

材料:光学级PMMA

耐温：-35℃～90℃

适用LED:lumileds、Z-power、Edison、Lumen、helio、everlight、prolight、harvatek、1.本产品采用高精度非球面光学设计,对LED光源所发出的光线的聚光效率可达到90%以上(板材3mm厚时光穿透率为92.8%),聚光性,亮度,光效优异；

2.材质为原装进口光学级PC(不同于其他厂家采用的PMMA材料),产品通过SGS认证，常期在紫外线下不会发黄老化，符合ROHS环保要求。高透光、热稳定性高、玻璃般的透明感、防火、抗冲击强度高、结构设计良好的光源遮盖率，使光利用率化；

3.该款产品透光处理，设计原理采用桥型设计，透镜中间的非球面透镜设计宇光源紧密接触，透镜周边设计有螺丝孔，一个透镜对应一个光源，使灯珠设计合理并安装简便；。

适用范围：广泛应用于路灯以及隧道灯

4.我司还有以下路灯透镜:单颗花生米透镜,20W.24W.30W路灯联体透镜Model: HS-28W street lamp lens Surface: transparent Specifications: 95mm ×115mm Emitting angle: 60*120 Material: optical grade PMMA Temperature: -35℃ ~ 90℃ Application of LED:lumileds, Z-power, Edison, Lumen, Helio, Everlight, Prolight, harvatek, 1 of the products using high precision aspheric optical design, the LED light collecting efficiency can reach above 90% ( 3mm sheet metal thickness through time rate of 92.8% ), the luminance, luminous efficiency, excellent; 2 are made of imported optical grade PC (unlike other manufacturers to adopt PMMA material ), product certification through the SGS, often under ultraviolet light, never yellow aging, in line with the ROHS environmental protection requirements. High light transmittance, high thermal stability, glass-like transparent, fireproof, high impact strength, structure design, good light source cover rate, so that the light utilization rate optimization; 3 this product transparent processing, design principle of the bridge design, the center of the lens aspheric lens design Yu source close contact, periphery of the lens design with a screw hole, a lens corresponding to a light source of the lamp bulb, reasonable design and convenient installation;. Scope of application: widely used in street lamps, tunnel lights The 4 Division I and the streetlight lens: single peanuts lens, 20W.24W.30W street lamp CIS lens 深圳市鸿莘光电有限公司

地址：深圳市宝安区沙井镇万丰工业区万丰中路221号3栋

电话：0755-29898076

传真：0755-29898076

陈生：185-7558-5197

Q Q：1972456776

E-Mail：cplens@163.com

网站：​