科聚亚 合成酯类基础油 HATCOL 1570

PRODUCT DATA

HATCOL 1570

LUBRICANT GRADE POLYOL ESTER

S P E C I F I C A T I O N P R O P E R T I E S

SPECIFICATIONS SPECIFICATIONS TYPICAL METHOD

Viscosity @ 100°C, cSt 4.8 - 5.1 4.95 ASTM D-445

Flash Point, °C, C.O.C. 241 min 249 ASTM D-92

Pour Point, °C -54 max -62 ASTM D-97

Total Acid Number, mgKOH/g 0.05 max 0.01 ASTM D-664

Water Content, wt % 0.05 max 0.02 ASTM D-1533

T Y P I C A L P R O P E R T I E S

PROPERTY

TYPICAL INSPECTIONS

METHOD

Viscosity @ 40°C, cSt 24 ASTM D-445

@ -40°C, cSt 7,500 ASTM D-2532

Viscosity Index 133 ASTM D-2270

Specific Gravity 25/25°C 0.985 ASTM D-4052

Appearance Clear, Yellow Liquid QL-4099

Hydroxyl, mgKOH/g 2 AOCS CD 13-60

Density lbs/usg @ 15.5°C 8.25 ASTM D-4052

Fire Point, °C 282 ASTM D-92

Evaporation Loss, % 4 ASTM D-972

6.5 hrs. @ 204°C

S1570C1

01/29/02 Rev. 2

Page 1 of 1

Hatco Corporation•1020 King George Post Road•Fords, NJ 08863•Tel 732.738.1000•Fax 732.738.9385•

www.hatcocorporation.com

This information is furnished without warranty, representation, inducement or license of any kind, except that it is accurate to the best of Hatco’s knowledge or obtained

from sources believed by Hatco to be accurate. Hatco does not assume any legal responsibility for use or reliance upon same. Tests should be carried out only by

chemists or chemically qualified technicians. Before using any chemical, read its label and Material Safety Data Sheet.