深圳矽递科技有限公司
主营产品:
2023年10月12日 15:28
型号 |
LED05291P |
加工定制 |
否 |
Seeed官网地址: //www.seeedstudio.com/depot/setstore.php?store=dp 请将以上链接直接复制到浏览器地址栏后打开即可 4 digit display module is usually a 12 pin module. In this Grove gadget, we utilize a TM1637 to scale down the controlling pins into 2 Grove pins. It only takes 2 digital pins of Arduino or Seeeduino to control the content, even the luminance of this display. For projects that require of alpha-numeric display, this can be a nice choice. Features 4 digit red alpha-numeric display Grove compatible 8 adjustable luminance levels Application Ideas Time display Stopwatch Sensors’ input display For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through and before your using of the product. Documents Please visit our page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our. Introduction Grove - 4-Digit Display module is a 12-pin module. In this module, we utilize a TM1637 to scale down the number of controlling pins to 2. That is to say, it controls both the content and the luminance via only 2 digital pins of Arduino or Seeeduino. For projects that require alpha-numeric display, this can be a nice choice. Features 4 digit red alpha-numeric display Grove compatible interface (3.3V/5V) 8 adjustable luminance levels Application Ideas Time display Stopwatch Sensors’ input display Specifications Item
Min
Typical
Max
UnitVoltageCurrentDimensionsNet Weight 3.3 5.0 5.5 VDC 0.2 27 80 mA 42x24x14 mm 7±1 g Interface Function
Grove interface - Can be connected to digital port on Grove - Base Shield. 4 - digit display - Common anode digital tube. Pin definition: CLK DIO VCC GND Usage The module uses an LED drive chip - TM1637 to control the contents and change the luminance. Here we drive it to display time.
1. Connect the Grove socket marked "IN" on the LED Strip Driver and digital port 2 of the with a Grove cable. You can change to the digital port as you like. But don't forget to change the port number in the definition of the demo code at the same time.
2. Plug onto Arduino/Seeeduino or plug onto Arduino Mega.
Seeeduino and Grove - 4-digit display:
Arduino Mega and Grove - 4-digit display:
3. Connect Arduino/Seeeduino to PC via a USB cable.
4. Download and . Unzip and put them in the libraries file of Arduino IDE by the path: ..arduino-1.0libraries. 5. Restart the Arduino IDE, open one demo code you like, for example ClockDisplay directly by the path:File -> Example ->DigitalTube->ClockDisplay.
6. Upload the demo code and the clock will be ticking in a few seconds. Please click if you do not know how to upload. You can see this:
Resources Support If you have questions or other better design ideas, you can go to our or to discuss.
联系方式