非填充PC无卤阻燃 V0 沙伯基础 945-WH9D680 瓷白色粒料

非填充，注射级,无氯，非溴UL - 94 V0,有各种不透明的颜色,适用范围广

TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 50 mm/min 630 kgf/cm2 ASTM D 638 Tensile Stress, brk, Type I, 50 mm/min 660 kgf/cm2 ASTM D 638 Tensile Strain, yld, Type I, 50 mm/min 6 % ASTM D 638 Tensile Strain, brk, Type I, 50 mm/min 125 % ASTM D 638 Tensile Modulus, 50 mm/min 23200 kgf/cm2 ASTM D 638 Flexural Stress, yld, 1.3 mm/min, 50 mm span 1030 kgf/cm2 ASTM D 790 Flexural Modulus, 1.3 mm/min, 50 mm span 23900 kgf/cm2 ASTM D 790 IMPACT Value Unit Standard Izod Impact, notched, 23°C 81 cm-kgf/cm ASTM D 256 Instrumented Impact Total Energy, 23°C 748 cm-kgf ASTM D 3763 THERMAL Value Unit Standard Vicat Softening Temp, Rate B/50 143 °C ASTM D 1525 HDT, 0.45 MPa, 3.2 mm, unannealed 137 °C ASTM D 648 HDT, 1.82 MPa, 3.2mm, unannealed 126 °C ASTM D 648 CTE, -40°C to 40°C, flow 6.66E-05 1/°C ASTM E 831 CTE, -40°C to 40°C, xflow 6.66E-05 1/°C ASTM E 831 Relative Temp Index, Elec 130 °C UL 746B Relative Temp Index, Mech w/impact 120 °C UL 746B Relative Temp Index, Mech w/o impact 130 °C UL 746B PHYSICAL Value Unit Standard Specific Gravity 1.19 - ASTM D 792 Mold Shrinkage, flow, 3.2 mm 0.6 - 0.8 % SABIC Method Melt Flow Rate, 300°C/1.2 kgf 10 g/10 min ASTM D 1238 ELECTRICAL Value Unit Standard Arc Resistance, Tungsten {PLC} 7 PLC Code ASTM D 495 Hot Wire Ignition {PLC) 2 PLC Code UL 746A High Voltage Arc Track Rate {PLC} 4 PLC Code UL 746A High Ampere Arc Ign, surface {PLC} 3 PLC Code UL 746A Comparative Tracking Index (UL) {PLC} 2 PLC Code UL 746A FLAME CHARACTERISTICS Value Unit Standard UL Recognized, 94V-2 Flame Class Rating (3) 0.8 mm UL 94 UL Recognized, 94V-0 Flame Class Rating (3) 1.14 mm UL 94 UL Recognized, 94-5VA Rating (3) 3.04 mm UL 94 Glow Wire Flammability Index 960°C, passes at 1 mm IEC Glow Wire Ignitability Temperature, 1.0 mm 875 °C IEC Oxygen Index (LOI) 35 % ISO 4589 Processing Parameter Injection Molding Value Unit Drying Temperature 120 °C Drying Time 3 - 4 hrs Drying Time (Cumulative) 48 hrs Maximum Moisture Content 0.02 % Melt Temperature 295 - 315 °C Nozzle Temperature 290 - 310 °C Front - Zone 3 Temperature 295 - 315 °C Middle - Zone 2 Temperature 280 - 305 °C Rear - Zone 1 Temperature 270 - 295 °C Mold Temperature 70 - 95 °C Back Pressure 0.3 - 0.7 MPa Screw Speed 40 - 70 rpm Shot to Cylinder Size 40 - 60 % Vent Depth 0.025 - 0.076 mm

温馨提示:因本页面展示有限无法完全描述产品更多相关信息；

因塑胶行情每天每时波动较大无法及时更新，请亲们理解！

了解新和信息可直接来电，谢谢！