上海拜耳高粘度加纤增强级PC塑胶原料 牌号1095

上海拜耳高粘度加纤增强级PC塑胶原料牌号1095 产品特性及用途：含15%玻纤增强，高粘度; 易脱模，体积熔融指数6.0 厘米3/10分钟，可用于电动工具外壳 上海拜耳PC 1095 物性表： Physical Nominal Value Unit Test Method Density 1.29 g/cm³ ISO 1183 ApparentDensity 2 0.64 g/cm³ ISO 60 Melt Mass-Flow Rate(MFR)(300°C/1.2 kg) 7.0 g/10 min ISO 1133 Melt Volume-Flow Rate(MVR)(300°C/1.2 kg) 6.00 cm³/10min ISO 1133 MoldingShrinkage 3 ISO 294-4 Across Flow: 2.00mm 0.45 % Flow: 2.00mm 0.45 % WaterAbsorption(Saturation,23°C) 0.24 % ISO 62 WaterAbsorption(Equilibrium, 23°C, 50%RH) 0.10 % ISO 62 Mechanical Nominal Value Unit Test Method Tensile Modulus(23°C) 4600 MPa ISO 527-2/1 Tensile Stress(Yield, 23°C) 64.0 MPa ISO 527-2/5 Tensile Stress(Break, 23°C) 45.0 MPa ISO 527-2/5 Tensile Strain(Yield, 23°C) 4.6 % ISO 527-2/5 Tensile Strain(Break, 23°C) 12 % ISO 527-2/5 FlexuralModulus 4(23°C) 4400 MPa ISO 178 FlexuralStrength 4 ISO 178 3.5% Strain,23°C 95.0 MPa 23°C 105 MPa Flexural Strain atFlexural Strength 5(23°C) 5.8 % ISO 178 Impact Nominal Value Unit Test Method Charpy Notched ImpactStrength 6(23°C, Complete Break) 10 kJ/m² ISO 179/1eA Charpy UnnotchedImpact Strength ISO 179/1eU -60°C, CompleteBreak 90 kJ/m² -30°C 100 kJ/m² 23°C 120 kJ/m² Notched Izod ImpactStrength 6(23°C, Complete Break) 10 kJ/m² ISO 180/A Multi-AxialInstrumented Impact Energy ISO 6603-2 -30°C 13.0 J 23°C 25.0 J Multi-AxialInstrumented Impact Peak Force ISO 6603-2 -30°C 3000 N 23°C 3600 N Hardness Nominal Value Unit Test Method Ball IndentationHardness 129 MPa ISO 2039-1 Thermal Nominal Value Unit Test Method Heat DeflectionTemperature(0.45 MPa,Unannealed) 141 °C ISO 75-2/B Heat DeflectionTemperature(1.8 MPa,Unannealed) 135 °C ISO 75-2/A Vicat SofteningTemperature -- 144 °C ISO 306/B50 -- 145 °C ISO 306/B120 Ball PressureTest(136°C) Pass IEC 60695-10-2 CLTE - Flow(23 to 55°C) 0.000035 cm/cm/°C ISO 11359-2 CLTE -Transverse(23 to 55°C) 0.000065 cm/cm/°C ISO 11359-2 RTI Elec(1.50 mm) 80.0 °C UL 746 RTI Imp(1.50 mm) 80.0 °C UL 746 RTI Str(1.50 mm) 80.0 °C UL 746 Electrical Nominal Value Unit Test Method SurfaceResistivity 1.0E+16 ohm IEC 60093 VolumeResistivity(23°C) 1.0E+16 ohm·cm IEC 60093 ElectricStrength(23°C, 1.00 mm) 38 kV/mm IEC 60243-1 RelativePermittivity IEC 60250 23°C, 100Hz 3.20 23°C, 1MHz 3.20 DissipationFactor IEC 60250 23°C, 100Hz 0.0010 23°C, 1MHz 0.0090 Comparative TrackingIndex IEC 60112 SolutionA 175 V SolutionB 125 V Flammability Nominal Value Unit Test Method FlameRating UL 94 3.00 mm V-0 1.50 mm V-2 Glow Wire FlammabilityIndex IEC 60695-2-12 0.750mm 850 °C 1.50 mm 960 °C 3.00 mm 960 °C

欧源塑胶原料公司销售原厂原包新料，所有牌号均可免费提供官方物性表，帮助客户寻找最合适最节省成本的塑料牌号，并可免提供UL黄卡、FDA认证、RoHS报告、SGS报告REACH测试报告等，索取权威资料请致电

自售出之日起七天内，用户在正常使用该产品的情况下，如果出现产品质量问题，可以选择退货。由销售者按原销售价格为用户退货