富麟牌不绣钢板电脑直接驱动式自动剪线平缝机

此款机器专为牛仔布料，洗水布料而打造！

特点：

1．面板采用了不锈钢板，最适合做梭织、牛仔，面板可保持永久不会褪漆。

2．性能价格比，为使用价值的自动切线机种之星，美观实用，经久耐用，稳定可靠，节能经济。

3.优化的内置式直驱伺服马达。低振动、低噪音、安装方便、清洁环保;结合了航空航天技术, 起缝、停车迅速、停针定位精准，0至4000针的转换只需0.12秒；无"V"字型皮带传动，彻底解决了因皮带摩擦而产生的料屑污染,皮带缠线问题,并且大大减少停车,提速时的故障率,提高缝制效率。

4.省电效率高:比普通马达省电60%左右,较之交流马达节省10%,同比变频伺服马达节省30%以上。

5.使用操作面板可直接调节缝度,操作简便。

6.设定参数确认踏板起缝、中立与停车位置,操作简便;显示故障代码便于故障的确认及排除。

7.照明灯和自动倒缝开关做成一体,并镶嵌在机壳内与机壳溶为一体,外观更美观,操作更方便。

Features:

1.Panel using stainless steel, the most suitable for woven, denim, the panel will not be kept permanently faded paint.

2.The best cost performance for the most value in use of automatic cutting machine types of stars, beautiful and practical, durable, reliable, energy-saving economy.

3. Optimization built-in patented direct-drive servo motors.Low vibration, low noise, easy installation, clean and green; a combination of aviation and aerospace technology, from the joint, stopping quickly, precise needle positioning, 0-4000 needle conversion just 0.12 seconds; no "V" shaped belt drive and completelysolved due to belt friction material generated debris pollution, belt line wrapped around the problem, and significantly reduced parking, when the failure rate of speed and improve the efficiency of sewing.

4. Saving efficiency: 60% of energy than conventional motor about 10% savings compared to the AC motor, an inverter servo motor to save over 30%.

5. Use the control panel can be sewn directly regulate the degree, easy to operate.

6. Set the parameters confirm the pedal from the seam, neutral and parking spaces, easy to operate; display fault code to facilitate failure recognition and exclusion.

7. Lighting and automatic reverse feed switch made one, and mounted on the chassis and chassis as one solution, look more beautiful, more convenient operation.