金属切屑破碎机

CRUSHING OPERATION

The oily, stringy or nested chips to be crushed are discharged into the feed funnel by

way of a chip conveyor or by a dumping device. The rotating knife head with hardened

shear knives pulls the entire ball of chips past the tearing blocks fixed in the primary

grinding chamber. Even more difficult chips can be crushed (e.g. stainless steel)

because of the special shape of the hardened tearing blocks. The chip turnings

fall into the secondary grinder where they are cut further to a very fine composition

The rotating ejector discharges the crushed chips into a conveyor or

container.