APA系列气动压装机

气动压装机用途广泛，主要用于装配整流子、转子绝缘端板、轴承等，同时还可适用于定子线圈的装配和整形等工艺流程。

该机采用优质气动元件，配合专用的控制器，性能可靠，经久耐用。本设备操作方便，工件装卸容易，生产效率高。只需将工件放入机器面板上的压装模腔内，双手按“起动”按钮，机器便按预先编排的程序自动进行“快进-工进-压装-保压-返回”等动作，直至压装过程完毕。

机器精度高，性能稳定，是微型电机生产线上（或单机）大批量生产的理想配套设备之一。

The machine is suitable for a number of usages,such as inserting the commutator,insulating end plate,gear,etc.Itcan also be used in assembling the uniform into a stator,and shaping its form.

With the usage of a number of qualified pneumatic compoents and a special controller,The machine guarantees the excellent performance of reliability and durability.When the operator pushes the double "start"buttons down with a working piece being put inside the bottom mould,of core sheet being put inside the bottom mould,the machine will finish the whole inserting program of working feeding-pressing-pressure keeping-quick restoring.

Due to its high level of stability,precision and efficiency,it is an ideal machine for micro-motor production line or single equipment manufacturing.

参数/型号

Parameter/Model SAPA 20/300 APA 20/500 转子芯轴直径

Armature shaft diameter φ3～φ20 φ3～φ20 mm 转子铁芯直径

Armature core diameter ≤φ 80 ≤φ 100 mm 转子芯轴长度

Armature shaft length ≤180 ≤ 200 mm 转子铁芯迭厚

Armature core thickness ≤100 ≤120 mm 气缸行程

Cylinder max.stoke 150 200 mm 额定输入功率

Rated input power 0.1 0.1 KVA 输出作用力

Max.outprt pressing force 300 500 kgf 额定工作压力

Rated wording pressure 0.2～6.0 Mpa 工作压力

Max.working pressure 1 Mpa 额定输入电压

Input power source 单相（Single phase)220V,50Hz ﹣﹣ 机体尺寸

Main machine dimension 500×480×1600 500×480×1700 mm3 重量

Weight ～120 ～150 kgf