示波器GDS-2062

产品名称：固纬 GDS-2062 60M 2通道示波器

固纬 GDS-2062 60M 2通道示波器产品介绍：60MHz频宽2输入通道1GSa/s即时取样率以及 25GSa/s 等效取样率25000点之记忆体长度5.6吋 TFT 彩色 LCD 荧幕支援USB HOST/DEVICE：可使用USB随身碟及 USB 印表机支援AC/DC电源操作模式（选购）规格：垂直系统通道数量2带宽DC ~ 60MHz (-3dB)上升时间5.8ns Approx.灵敏度2mV/p ~ 5V/p (1-2-5 increments)精度∮(3% x |Readout|+0.05 p x Volts/p+0.8mV)输入耦合AC, DC & Ground输入阻抗1M∮2%, ~16pF极性Normal & Invert输入300V (DC+AC peak), CATII波形处理+ , - , FFT偏移范围2mV/p ~ 20mV/p : 0.5V ; 50mV/p ~ 200mV/p : 5V ; 500mV/p ~ 2V/p : 50V ; 5V/p : 300V带宽限制20MHz (-3dB)触发触发源CH1 , CH2 , Line , EXT触发模式Auto-Level, AUTO, NORMAL, SINGLE, TV, Edge, Pulse Width Time-delay, Event-delay耦合AC , DC , LF rej. , HF rej. , Noise rej.灵敏度DC ~ 25MHz : Approx. 0.5p or 5mV

25MHz ~ 60MHz : Approx. 1p or 10mV外部触发范围15V灵敏度DC ~ 30MHz : ~ 50mV ; 30M ~ 60MHz : ~100mV输入阻抗1M∮2% , ~ 16pF输入电压300V (DC AC peak) , CATII水平系统范围1ns/p ~ 10s/p (1-2-5 increments); ROLL : 250ms/p ~ 10s/p模式MAIN, WINDOW, WINDOW ZOOM, ROLL, SCAN, X-Y精度∮0.01%前置触发20 p maximum后置触发1000 pX-Y模式X-Axis输入Channel 1Y-Axis输入tChannel 2相位移∮3 at 100kHz信号捕获时时采样率1GSa/s maximum等效采样率25GSa/s maximum垂直分辨率8 Bits记录长度25K Dots maximum采集模式Normal, Peak Detect, Average峰值检测10ns平均2 , 4 , 8 , 16 , 32 , 64 , 128 , 256光标测量电压测量Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot , Fall Preshoot/Overshoot时间测量Freq , Period , Rise Time , Fall Time , Positive Width , NegativeWidth , Duty Cycle延长测量Eight different delay measurement光标测量Voltage difference between cursors (V) Time difference between cursors (T)自动计数Resolution : 6 digits

Accuracy : ∮2%

Signal Source: All available trigger source except the Video trigger mode控制面板功能自动设置Adjust Vertical VOLT/DIV, Horizontal TIME/DIV, and Trigger level automatically存储设置Up to 20 sets of measurement conditions保存波形24 sets of waveform显示TFT LCD Type5.6 inch显示分辨率234 (Vertically) x 320 (Horizontally) Dots显示格数8 x 10 pisions ; 8 x 12 pisions (menu off)显示亮度Adjustable接口Go/NoGo输出5V Maximum/10mA TTL Open Collector OutputRS-232接口DB 9-pin male DTE RS-232 interfaceGPIB 接口 (选件)Fully programmable with IEEE 488.2 complianceUSBUSB Host/Device 2.0 full speed supported电源电压范围AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection电池供电（选件）Battery : 11.1V Li-Ion battery pack

Charge Time : 8 hours (Power ON)

Operating Time : 3 hours , depending on operating condition其他多国语言菜单Available在线帮助Available时钟Time and Date, Provide the Date/Time for saved data尺寸重量254D x 142H x 310W(mm)

Approx. 4.3kg