厂家 热销 优质 滚轮扶正器 扶正器 套管扶正器

产品介绍 用途：主要用于大斜度井和水平井完井施工过程中的套管扶正居中，可将套管下入时与井壁的滑动摩擦变为滚动摩擦，能有效减少下套管是的摩阻力。此外，右旋的螺旋槽还具有自清洗作用，可以改变套管柱遇阻的受力状态，保证施工过程中的套管顺利下入。滚轮扶正器还可起到清除井壁泥饼，提高水泥浆顶替效率等作用。是一种大斜度井和水平完井施工作业中不可缺少固井附件工具。

工作原理：把滚轮扶正器套在管柱设计位置上，将定位销拧紧，下入井中。当管串进入造斜段和水平段时，管轮扶正器各位置在井眼里将套管柱扶正抬起使其居中，避免套管紧贴井壁，并把套管贴井壁的滑动变为滚动居中器中滚子的滚动，使套管的下入摩擦阻降到。

USES: mainly used for high Angle Wells and horizontal well completion center construction in the process of casing centralizer, and casing can be fashionable and borehole wall under the sliding friction into rolling friction, can effectively reduce casing friction resistance. In addition, the right hand spiral groove also have self-cleaning effect, can change the stress of casing string tight, guarantee the project construction in the process of casing running. Roller centralizer still can rise to remove wall mud cake, improve the efficiency of slurry displacement, and so on. Is a kind of high Angle Wells and horizontal well completion construction tools are indispensable in cementing accessories.

Working principle: the roller centralizer position in the string design, tighten the positioning pin, down into the well. When pipe string into the deflecting section and horizontal section, the engineer will centralizer every position in the eyes of the well casing string centering lift make its center, to avoid casing clingy wall, and stick the casing wall slip into rolling middle roller in the rolling and the casing running friction resistance to a minimum.

产品实拍图