上海科翼信息技术有限公司
主营产品:
2023年12月15日 18:53
操作距离 |
10(m)(m) |
品牌/型号 |
LG/skychip002 |
2.4GHz无线传输提供最远达到10米的操作距离精巧独到的俊朗的外观,绝佳握感无需对码的智能连接技术可调节的800/1000/1600cpi的高精度光学寻迹引擎电池使用寿命长达3个月
2.4GHz数码无线传输提供远达10米的操作距离
16个自动切换的工作频道和多达6万组的安全密码面杜绝外来干扰
Nano极细微接收器,即插即用,无需对码的智能连接技术。
鼠标内置存储器,更换电池无须重新对码
光学寻迹引擎,可调节的800到1600DPI光标速度
专为手型设计的外型提供绝佳的握感
微型接收器内藏设计
4段省点设计,1颗AAA的碱性电池,提供长达3个月的电池使用寿命
产品性能参数:
无线载播频率:2402MHz--2480MHz
无线要作频道:16个,自动跳频
额定工作电压:1.5V
额定工作电流:20mA
寻迹系统:光学
加速度:14英寸/秒
5级电源模式,长达1-3个月的电池使用寿命。
一级:正常工作模式,在1.5V的单电池供电情况下,正常工作电流19mA。
二级:不移动Mouse,马上进入此模式,Sensor的LED变暗,电流4.4mA。
三级:不移动1S后进入此模式,电流2.3mA。
四级:不移动30~60S后进入此模式,Sensor的LED闪烁,电流1.4mA。
五级:10分钟后进入深度休眠模式,Sensor、MCU、RF都进入PowerDown,电流0.009mA;这时除了时钟之外,所有元器件都停止工作,通过单击按键可以唤醒鼠标工作。
分辨率:800-1600CPI可调
鼠标净重:53g
接收器净重:10g
鼠标大小:85*58*32mm
接收器大小:18*14.5*6.5mm
2.4GHz digital wireless transmission provides up to 10 meters operating distance
16 channels and automatically switch the working group of up to 60,000 security codes to prevent outside interference with surface
Nano very fine receiver, plug and play, no need to code the intelligent connection technology.
Mouse, built-in memory, replace the batteries need to re-code
Optical tracing engine can adjust the cursor speed of 800 to 1600DPI
Specifically for the hand design provide excellent exterior grip
Micro-receiver built design
4 province-point design, one AAA alkaline batteries, providing up to 3 months of battery life
Product Specifications:
Wireless set broadcast frequency: 2402MHz - 2480MHz
Wireless channel should be: 16, automatic frequency hopping
Rated operating voltage: 1.5V
Rated working current: 20mA
Tracing systems: optical
Maximum acceleration: 14 inches / sec
Adjustable resolution :800-1600CPI
Mouse weight: 53g
Receiver Weight: 10g
Mouse size: 95 * 65 * 37mm
Receiver size: 18 * 14.5 * 6.5mm
Five power modes, up to 1-3 months of battery life.
A: Normal mode, a single 1.5V battery in the case, the normal operating current 19mA.
Two: do not move the Mouse, soon to enter this mode, Sensor dimming of the LED, current 4.4mA.
Three: do not move into this mode after 1S, current 2.3mA.
Four: do not move 30 ~ 60S entered this mode, Sensor LED flashes, current 1.4mA.
Five: 10 minutes into the deep sleep mode, Sensor, MCU, RF have entered PowerDown, current 0.009mA; then in addition to the clock, all components are stopped by clicking the mouse button to wake up the work.
联系方式