半自动倒角机,台式倒角机,双头倒角机

型号YDL-110SA

1、专对圆管及圆棒端面内外、倒角及铣端面均匀完成，快速准确

2、半自动型：人工进料、自动进退刀速度快，要更换不同尺寸的工件只需作简单的调整。

3、双向倒角型：凸轮同步进给，加工稳定性高，可两边同时完成，内角、外角及铣端面一次完成，可实现产量的倍数增加。

4、适合材质：不锈钢、铁、铜、铝的管材及棒材。

倒角机100mm以上的管件可加背料辅助，100mm以下的管件可以加振动盘辅助，超出此范围皆用专用机设计。

非标机台长度可以做到2000mm，管径可以做到Φ150mm。

----------------------------------------------------------

标准配套：

1、主机

2、夹模1组

3、刀片1组

4、标准刀头1个

5、手工具1包

----------------------------------------------------------

特殊配件：

1、不同尺寸夹模

2、自动给料装置

(依工件尺寸定制)

----------------------------------------------------------

型号Type YDL-110SA

马达Motor 3/1.5HP*2/4P

加工管径(mm)Processing tube diameter (mm) Ф50-Ф100

使用压缩机(kg/cm2)Applied compressor (kg/cm2) 6-8

----------------------------------------------------------

Model YDL-110SA

1. It is especially designed for end internal and external chamfering of round pipe and round bar as well as end milling, which shall be completed in uniform, rapid and accurate way.

2. Semi-automatic type: High speed in manual feeding and automatic cutter advancing and retreating, only simple adjustment is required for change of different size work-pieces.

3. Two-way chamfering type: Cam synchronous feeding, high stability in processing, it can be completed on both sides at the same time, one pass operation can be finished with interior angle, exterior angle and milling end for multiple increase of output.

4. Applicable materials: Stainless steel, iron, copper, aluminum tube and bar.

The tube for more than 100mm chamfering machine can be added with back material for assistance. The tube for less than 100mm chamfering machine can be added with vibration disc for assistance. Special machine design shall be required in case that the range is exceeded.

The length of non-standard stand can be up to 2000mm and the tube diameter can be up to Φ150mm.

----------------------------------------------------------

Standard configuration:

1. Main machine

2. Die clamp 1 group

3. Cutter blade 1 group

4. Standard cutter head 1 piece

5. Hand tool 1 bag

----------------------------------------------------------

Special accessories:

1. Die clamps of different size

2. Automatic feeding device

(Customizing according to size of work-piece)