厂家长期供应便携式柔性非晶硅薄膜SPCB12.0(18.0)太阳能电池组件

Electrical Specifications:

Maximum Power (Pmax) : 12.0 W

Voltage at Pmax (Vmp) : 18.0 V

Current at Pmax (lmp) : 660 mA

Short-circuit Current (Isc) : 850 mA

Open-circuit Voltage (Voc) : 24.0 V

Construction Characteristics:

Dimensions:

Length : 818 mm, 1,248 mm including package folder

Width : 495 mm

Depth : 2 mm

Package : 255 mm×130 mm×40 mm

Weight : 780 g

Output Cables : ~0.75 mm2 & ~ 400 mm length cable, with weatherproof quick contact connector

By-pass Diodes : Connected across every solar cell

Laminate:

Encapsulation : Durable ETFE high light-transmissive polymer

Adhesive : Ethylene propylene copolymer adhesive-sealant with microbial inhibitor

Cell Type : Triple junction amorphous silicon solar cells connected in series

General Description:

1. Change sunlight into electricity power.

2. Can be carried and set up on any situation charging storage battery, water pump, satellite phone, GPS locator, and any rated 12 V power load.

3. Widely applied for field work, outdoor travel, communications, etc.

4. Solar charger for communications equipment, field work equipment, outdoor travel equipment, etc.

Note:

1. Electrical specifications (±5%) are based on measurements performed at standard test conditions of 1000 W/m2 irradiance, Air Mass 1.5, and cell temperature of 25℃ after stabilization.

2. Specifications subject to change without notice.