映兴电子科技(深圳)有限公司
主营产品:
2023年11月17日 11:23
种类 |
压力 |
制作工艺 |
集成 |
输出信号 |
模拟型 |
品牌/型号 |
sensata/PLCD Sensor |
PLCD-Displacement Sensors (Permanentmagnetic Linear Contactless Displacement Sensors) basically consist of a special soft magnetic core surrounded by a coil, wound arround its entire length. On each end of the core there is a second short coil.
A permanent magnet guided close to the sensor causes localized magnetic saturation and thereby a virtual pision of the core.
The position of the saturated area along the sensor axis can be determinated by the coil system.
The sensor is supplied by an external electronic module or by an integrated circuit which also produce the output signal.
The output signal is linearly dependent on the position of the magnet. The signal can be conditioned by a standard electronic module, which gives either a current output (4 ... 20 mA) or a voltage output (0 ... 5 V or 0 ... 10 V).
Customer specific interfaces are possible.
規格/特色:
Characteristics
◆Continuous, contactless, linear displacement measurement
◆No mechanical connection between driving magnet and sensor
◆Magnetic operation adaptable to inpidual applications
◆Control through partitions of non-ferromagnetic materials
◆Large mounting tolerances
Typical Specification of the PLCDMeasurement Range Linear:15 mmto 400 mmGap Magnet – Sensor:1–20 mmMeasurement Range Angle:20° to 270℃Driving Magnetic Field:20–30 mTOperating Temperatur Range:up to 180 °CCurrent Consumtion:<20 mAAvailable Signal Processing (ASIC):VP = 5 V ±10 %Output Signal Ua:0.5 V ~ 4.5 VSecond Output Signal Uak:4.5 V ~ 0.5 VProtection Class:IP 67 (higher on request)Typical Linearity:<2 %Typical Resolution:0.1% of measurement rangeThreshold Frequencies:0Hz / <100 HzHysteresis:<0.2 % of measurement range
应用项目:
Essential Fields of Application
(1) Special Vehicles: e.g. Excavators, forklifts
(2) Hydraulic, Pneumatic, Electric Drives: e.g. Position of Piston in cylinders, Positioning of valves.
(3) Machines, Plants and Installation
(4)Level Metering, Flow Metering
(5)Automation: e.g. servomechanism, linear and rotary actuators.
(6) Conveyer Technology and Storage Technique
(7)Building and Safety Engineering
客制服务:
Detailled informations, product samples, drawings and specifications are available on request.
联系方式