深圳科华诚科技有限公司
主营产品:
2023年09月18日 13:13
型号 |
iC-HD2 |
类型 |
驱动IC |
驱动芯片类型 |
24V线性驱动器 |
针脚数 |
20 |
用途 |
仪器 |
封装 |
TSSOP20 |
批号 |
2014+ |
iC-HD2
QUAD DIFFERENTIAL LINE DRIVER
Complementary short-circuit-proof push-pull driver stages for
RS422 and 24 V applications up to 2MHz
Pin-compatible to xx2068
Integrated line adaptation for high signal quality at 24V
Moderate slew rate reduces EMI
High driving capability of typically 200mA at 24V
Output saturation of just 0.3 V at 40 mAdc
Tristate function with excessive temperature
Error messaging with excessive temperature and undervoltage
TTL-/CMOS-compatible Schmitt trigger inputs,
voltage-proof to 40 V
Tristate function for bus applications
Integrated 5 V voltage regulator for 5mA
4.5 to 35 V single supply operation with low static power
dissipation
Operating temperature from -25 to 125 C (-40 C is optional)
Line drivers for 24 V control
engineering
Linear scales and encoders
Sensor systems
iC-HD is a robust line driver for industrial 5 V and 24 V
applications with four complementary output channels.
For signal lines with a characteristic impedance of
30 to 140
the integrated line adapter, optimized
to 75
, minimizes ringing effects which arise when
there is no line termination.
At a supply of 24 V the push-pull driver stages typically
provide 200mA to discharge the line and also
have a low saturation voltage (of typically 200mV
with a 40mA low-side load). The outputs are current
limited and short-circuit-proof, shutting down with excessive
temperature.
For bus applications the driver stages can be
switched to high impedance by a high at input NEN.
The driver stage inputs have a Schmitt trigger characteristic
and are compatible with CMOS and TTL
levels.
The device recognizes undervoltage at voltage regulator
output VREF and thus indirectly also at supply
voltage VB. VREF acts as a 5 V voltage supply for
external loads of up to 5 mA.
Excessive temperature and undervoltage are signaled
as an error by a low signal at the short-circuitproof
NERR output. For test purposes the temperature
monitor can be deactivated by applying a voltage
of greater than 12 V to input NEN.
The iC-HD contains internal ESD protection circuitry.
iC-Haus 线驱动器iC在工业控制系统驱动编码器信号过长线。
24V线驱动器转换逻辑电平到24V,降低信号对工业环境干扰敏感度。iC-Haus 也推出一款6通道5V线驱动器带 Encoder Link,成为超灵活接口:提供模拟旁路,BiSS组网模式等等。
应用:控制和自动化设备位置传感器
联系方式