iC-HX 3通道差分线驱动器, 低耗功能

iC-HX 3-Channel Differential Line Driver with Reduced Power Dissipation

Line drivers for 24 V control engineeringLinear scales and encodersMR sensor systems6 current-limited and short-circuit-proof push-pull driversDifferential 3-channel operation selectableIntegrated impedance adaption for 30 to 140 Ohm linesWide power supply range from 4 to 40 V200 mA output current (at VB = 24 V)Low output saturation voltage (< 0.4 V at 30 mA)Compatible with TIA/EIA standard RS-422Tristate switching of outputs enables use in busesShort switching times and high slew ratesLow static power dissipationDynamic power dissipation reduced with iC-xSwitchSchmitt trigger inputs with pull-down resistors, TTL and CMOS compatible; voltage-proof up to 40 VThermal shutdown with hysteresisError message trigger input TNEROpen-drain error output NER, active low with excessive chip temperature and undervoltage at VCC or VBOption: Extended temperature range from -40 to 125 °C

iC-Haus 线驱动器iC在工业控制系统驱动编码器信号过长线。

24V线驱动器转换逻辑电平到24V，降低信号对工业环境干扰敏感度。iC-Haus 也推出一款6通道5V线驱动器带 Encoder Link，成为超灵活接口：提供模拟旁路，BiSS组网模式等等。

应用:控制和自动化设备位置传感器