福斯ZAF 68 D液压油，RENOLIN ZAF 68 D抗磨液压油

供应福斯优质抗磨液压油ZAF 68 D

FUCHS RENOLIN ZAF 68 D

产地：上海、美国、德国

包装：18L/200L

福斯优质抗磨液压油RENOLIN ZAF 32 D/福斯液压油ZAF 46 D/福斯液压油ZAF 68 D

福斯优质抗磨液压油RENOLIN ZAF 32 D/福斯液压油ZAF 46 D/福斯液压油ZAF 68 D

福斯优质抗磨液压油RENOLIN ZAF 32 D/福斯液压油ZAF 46 D/福斯液压油ZAF 68 D

福斯优质抗磨液压油RENOLIN ZAF 32 D/福斯液压油ZAF 46 D/福斯液压油ZAF 68 D

福斯优质抗磨液压油RENOLIN ZAF 32 D/福斯液压油ZAF 46 D/福斯液压油ZAF 68 D

福斯优质抗磨液压油RENOLIN ZAF 32 D/福斯液压油ZAF 46 D/福斯液压油ZAF 68 D产品名称：RENOLIN ZAF 68 D产品说明：RENOLIN ZAF 68 D

RENOLIN ZAF DZinc and Ash-Free, Detergent Hydraulic OilsZinc and Ash-Free, Detergent Hydraulic Oils

Zinc- and ash-free hydraulic oils have steadily gained popularity over the last few years. In many cases the use of a zinc-free hydraulic oil is a must, especially in machine tools where hydraulic oils can contaminate other functional fluids.

RENOLIN ZAF D hydraulic oils are zinc- and ash-free hydraulic oils with good detergent properties. The detergent agents in these oils reduce the formation of residues and ageing by-products.

They are HM hydraulic oils in line with ISO 6743-4 but with additional detergent and dispersant characteristics.

The most important features of RENOLIN ZAF D hydraulic oils are:

Good oxidation stability and good resistance to ageing

Powerful EP properties and very good wear protection

Excellent corrosion protection

Rapid air release and low foaming

Good sludge transportation and cleaning properties

Good compatibility with sealing materialsApplication:

RENOLIN ZAF D products are high-grade HM hydraulic oils in line with ISO 6743-4 which can be used in all hydraulic systems but also as CKC lubricating oils in line with ISO 6743-6. RENOLIN ZAF D products contain additives which avoid the formation of residues and guarantee the functional reliability of machinery.

OLIN ZAF 32 D 46 D 68 D Hydraulic oil type acc. to ISO 6743-4 HM 32HM 46HM 68 acc. to DIN 51 502 HLPD 32HLPD 46HLPD 68 Lubricating oil type acc. to ISO 6743-6 CKC 32CKC 46CKC 68 acc. to DIN 51 502 CLP 32CLP 46CLP 68 CharacteristicsUnit Test methodColour 111ASTM D 1500Kinematic viscosity at 40 °Cmm²/s324668ASTM D 445at 100 °Cmm²/s5.46.98.6ASTM D 445Viscosity index 10010597ASTM D 2270Density at 15 °Ckg/l0.8780.8820.884ASTM D 1298Flash point, Cleveland open cup°C210230230ASTM D 92Pour point°C-33-27-24ASTM D 97Neutralization numbermg KOH/g0.350.350.35ASTM D 974Saponification numbermg KOH/g1.11.11.1ASTM D 94Air release at 50 °Cmin347ASTM D 3427Foaming, seq. Iml30/050/050/0ASTM D 892 seq. I-IIIseq. IIml20/020/020/0ASTM D 892 seq. I-IIIseq. IIIml20/020/020/0ASTM D 892 seq. I-IIICopper corrosiondegree of corr.1a-100A31a-100A31a-100A3ASTM D 130Rust prevention pass Apass Apass AASTM D 665Ageing behaviour, increase in neutralization number after 1000 hmg KOH/g< 2< 2< 2ASTM D 943Brugger boundary friction testN/mm²383838DIN 51 347 (D)FZG mechanical gear rig testload stage> 12> 12> 12DIN 51 354-2Vickers vane pump test, loss of mass on ringmg<120<120<120IP 281on vanes after 250 hmg<30<30<30IP 281Effect on SRE-NBR 1 seal material acc. to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours, relative volume change%765DIN 53 521 together with DIN 53 505change in Shore A hardnessShore-3-3-2DIN 53 521 together with DIN 53 505