各种优质流水线，生产线，生产流水线

品牌创业型号生产线流水线 用途生产流水线

流水线是在一定的线路上连续输送货物搬运机械，又称输送线或者输送机。按照输送系列产品大体可以分为：皮带流水线、板链线、倍数链线、插件线、网带线、悬挂线及滚筒流水线这七类流水线。一般包括牵引件、承载构件、驱动装置、张紧装置、改向装置和支承件等。流水线输送能力大，运距长，还可在输送过程中同时完成若干工艺操作，所以应用十分广泛。

line is in line for goods transportation machinery and conveying belt conveyor line or said. according to the series products of conveyor belts can be divided into: line line, chain chain of multiple lines, plug-ins, line, mesh belt, suspension lines and roller line that seven class line. generally include traction, bearing structure, the driving device, tension device, and supporting device etc redirection. lines conveying capacity, long distance, also can be finished in conveying process and some process operation, so widely used.

流水线的具体操作说明：

1、电器操作简要：

流水线的电源需要三相四线，外面装有总开关一个，（可用三相四线四极开关，也可用开关只控制三相电源，零线直接，注意切不可将第二种接法的零线也经过另外一个开关）。配电箱的n接零线，a, b, c接电源的三相电源，u, v, w接电动机，3，4接调速电机的f1, f2。5，6，7接调速电机的u，v，w。

2、启动电动机的方法：

先接通电源，此时三盏电源指示灯全部都会亮，证明三相电源已经到配电箱。此时可以按一下电机开的蓝色按钮，就可启动电机，假如不能启动，可以打开配电箱门，看一下第一排的第二个dz108开关，是否是红的长，蓝的短。如果不是将此蓝色的压下去就可。电动机启动后，然后打开流水线调速表的开关，再将调速表的电位器慢慢向上调，使转速表达到想要的速度。关机时先将调速表的电位器慢慢向下调到零，然后关闭调速表的开关，再按一下电机关的红色按钮，就可停止电机。Zui后将总开关关闭。

3、日光灯启动

按一下照明的蓝色按钮，就可启动日光灯，再按一下照明的红色关的红色按钮，就可停止日光灯。假如日光灯不亮，请检查日光灯支架上的平开关是否打开处于1的位置。Zui后检查第一排第三个，第四个dz47是否处于打开位置。

line of specific instructions：

1, electrical operation briefly:

lines of power needs three-phase four-wire type, with a total switch, outside of the three-phase four-wire type (or four switch, usable also switch control three-phase power, only not directly, pay attention to the region will be the second pick of neutral also after another switch). connect the n distribution box and neutral, b, c connect the power supply, u, v three-phase motor, 3, w pick up speed motor f1 and f2. speed up the motor 5,6,7 u, v, w.

2 and start motor method:

first turn on the power, the power indicator lights at three, all will have to prove three-phase power distribution box. this can click the blue button, motor can start motor, if can"t start, can open the door, see the power of a second dz108 switch, if the red and blue long. if not be the pressure on the blue. after starting motor, and then open line speed, the switch table to table the speed increase, slowly potentiometer rotational speed express to want. first off the table will speed to drop to zero, potentiometer slowly, then close the switch table, speed electric organ of the press the red button, it can stop the motor. finally will always switch off.

3, fluorescent lamp

click the button, the blue light can start fluorescent lamp, then click the lighting of the red button, red can stop fluorescent lamp. if the bright fluorescent lamp, please check the flat fluorescent lamp holder switch is open in 1 position. the first row third, fourth in the open position dz47 whether.