宁波保税区泰普变压器制造有限公司
主营产品:
2023年12月19日 18:26
铁心形状 |
E型 |
电源相数 |
单相 |
防潮方式 |
开放式 |
冷却形式 |
干式 |
频率特性 |
低频 |
外形结构 |
立式 |
型号 |
TP-DK3 |
额定功率 |
100VAW |
电压比 |
380/220 |
品牌/型号 |
泰普/TP-DK3 |
效率(η) |
0.16 |
铁心结构 |
环形 |
加工定制 |
是 |
应用范围 |
隔离 |
'TP-DK3系列机床控制变压器概述TP-DK3系列机床控制变压器适用于交流50-60HZ,一般输入额定电压不超过660V,输出额定电压不超过230V的电路中,作为各行各业的各类机床、机械设备等一般电器的控制电源、局部照明和信号灯的电源之用,是其它控制变压器更新换代的产品,采用进口材料和先进工艺进行制造,具有变压器体积小、损耗低,工作可靠,接线安全,适用性广等特点,产品符合GB5226,JB/T5555-2001,VDE0550-1-3,EN61558-1:1997,EN61558-2-13:2000等有关国家、国际标准,并荣获欧共体"CE"认证,证书编号:LVD100607-01,可与国外产品互换使用。
TP-DK3系列机床控制变压器技术特性
初级次级绕组分开绕制,当次级只有一个绕组时,它担负变压器的全部额定容量,次级如兼有控制、照明及指示灯绕组时,则按各绕组容量分配分别绕制,对单绕组且有中间抽头的变压器其各中间抽头容量,皆小于变压器的额定容量,只有电压输出端可担负额定容量。 TP-DK3 Machine Tool Control TransformerApplication:TP-DK3 series transformers are used in the 50-60HZ accircuit of input voltage less than 660V and output voltage less than 230V as machine equipment in various area for controlling the power of electrical equipment , lighting and Signal lamp.
This series transformer is favorable and used widely as small size, low loss and reliable function and Safety wire connection. It conforms to GB5226,JB/T5555-201,VDE0550-1-3,EN61558-1:1997,EN61558-2-13:2000and gets CE approval. Verification Number:LVD100607-01.
TP-DK3 series engine bed control transformer technology characteristic
primary secondary circles the system separately, when secondary when a winding, it shoulders the transformer completely the rated capacity, when secondary like has at the same time the control, the illumination and the indicating lamp winding, presses various windings capacity assignment to circle the system separately, to simplex winding, and has intermediate tap\'s transformer its each intermediate tap capacity, is smaller than transformer\'s rated capacity, only then the overvoltage out-port may shoulder the rated capacity.
'
联系方式