供应自动吹瓶机

WFM系列全自动吹瓶机

WFM series full automation bottle blowing machine

机器特点：

Machine features:

1、生产工艺流程全部自动化，可以同时配套多台机器组合到全自动生产线上，整个生产过程无须人手接触瓶胚或成品瓶。

1、With full automation production flow, it is allowable to connect many machines with auto production line, there is no need for manual operation for the whole production procedure.

2、本系列机器适合吹制200毫升—5公升的冷、热灌装塑料瓶或其它塑料容器。

2、This series machine applies to blast-produced of 200ml-5 L cold or hot filling plastic bottle or other plastic containers.

3、本系列机器按不同的产品需要可以配置为单模腔、双模腔、三模腔、四模腔或六模腔的设计，使用功能上可以单独调整为使用单腔单拉伸缸以适应调机或试模等的不同需要。

3、According to different requirements for different products, the machine can be matched with dual cavity and dual stretching cylinder、three cavities and three stretching cylinders、four cavities and four stretching cylinders or six cavities and six stretching cylinders, so the function of single cavity and single stretching cylinder can be used separately for single cavity mould.

4、模具更换方便快捷，在相应机器的容模范围内无须调整容模厚度；

4、With fast and convenient mould replace, there is no need for adjusting the thickness of mold capacity. What is more, the mould used in this machine can be fixed onto traditional automatic-manual bottle blowing machine directly.

5、控制系统设有自动报障功能；当操作错误或出现故障时，电脑会显示并发出警报。

5、With auto alarm function, the computer shall display the fault information and alarms when happen to misoperation or failure.

6、采用恒压调温方式控制红外线灯管对瓶胚的加热，保证瓶胚加热的适量、准确、稳定，不受输入电压变化影响。

6、Adopt constant pressure and temperature adjustable to control the heating for bottle parison, the proper、accurate and stable heating can be guaranteed for bottle parison without the influence of the fluctuation of voltage.

7、各加温区设有独立分段控温；加温区内的灯管、反光板的位置及距离均可根据瓶胚的不同形状、大小进行调整，以达到***理想的加温效果。

7、There is separated and sublevel temperature control for each heating area, and the position and distance of lighting tube and reflector can be adjusted according to different shape and size of bottle parison so that realize ideal effect...