四开四色胶印机

Solna 425 Automatic The four-colour press. All the flexibility for larger assignments. It has a plate-to-press pin register for fast and accurate makeready. It is also a truly economical press, allowing you four-colour printing in one easy-to-set-up pass. With the Solna 425 Automatic you discover quality and performance normally found only in larger, more expensive presses. High-pile delivery The Solna 425 Automatic can be supplied with high-pile delivery and dryer. The high-pile delivery will permit not only longer runs, but is also capable of handling a number of smaller jobs without a change of pile. The Solna Press Control system SPC is available on this press. Press specification 425 Automatic Running Speed 8000 iph Sheet Size (max.) 483 x 640 mm Sheet Size (min.) 210 x 250 mm Board Size (max.) 475 x 640 mm Stock Thickness (max.) 0.6 mm Stock Thickness (min.) 0.04 mm Printing Area (max.) 474 x 635 mm Plate thickness(max.) 0.42mm Blanket size 585 x650mm Blanket thickness(Max) 1.90mm Feeder Capacity 800 mm Delivery Capacity(L) 500 mm Delivery Capacity(H) 1000 mm Gripper Margin (min) 9mm Griper Bite 5-8mm Power consumption at Max. Speed 11.5kw 50/60HZ Power requirement 12.9kw 50/60HZ Floor space(L) 2750X4515mm Floor space(H) 2750X6215mm Height 1800mm Weight (L) 7300kg Weight (H) 7920kg Standard Equipment • Modern PLC system • Sequential start-up sequence • Electrically controlled impression on • Printing units independently and electrically controlled by push buttons • Motorized feeder and delivery piles • High precision side lay register system • Safety guards in conformity with EU directives • SPC system available on special request • Ink