上海凯越电子有限公司
主营产品:
2023年10月29日 15:45
类型 |
激光干涉仪 |
测量范围 |
0~40m |
测量分辨率 |
0.4PPM |
最近工作距离 |
0.11(mm)(mm) |
用途 |
机床定位校准 |
品牌/型号 |
安捷伦Agilent/10777A |
光学直角尺是用来测量两个轴之间的垂直度,光线通过光学直角尺后以90度角折射出,使用的是直线度镜组Agilent 10777A Optical Square is used with the 5529A Dynamic Calibration System to measure squareness of machine tool axes. 描述The Agilent 10777A Optical Square, used with Agilent straightness measurement optics, adds squareness measurement capability to the Agilent 5529A calibration system. The optical square measures the squareness of axes during laser calibration of a machine tool. The Agilent 10777A uses two accurately-aligned mirrors to direct an output beam at precisely 90 degrees to an input beam.The Agilent 10777A is one component of a family of measurement optics that tailor interferometer systems for the physical layout and measurement requirements of each application. Configured with appropriate laser head and system electronics, the optics are part of a precise positioning or calibration system that improves product quality, increases yields, and facilitates manufacture of precision products.Squareness Measurement SpecificationsThe following specifications assume that the Agilent Dimensional Metrology Analysis System is used in conjunction with the Agilent 5529A calibration system to provide averaging and calculation capabilities for straightness, parallelism and squareness measurements.AccuracyShort Range Optics:Metric Units Mode: ±(0.5 0.1M) arc-seconds ±0.01 thetaEnglish Units Mode: ±(0.5 0.03F) arc-seconds ±0.01 thetaLong Range Optics:Metric Units Mode: ±(0.5 0.01M) arc-seconds ±0.025 thetaEnglish Units Mode: ±(0.5 0.003F) arc-secondes ±0.025 thetawhere:theta = calculated out-of-squarness angle in arc-secondsM = distance of travel of the moving optic in metersF = distance of travel of the moving optic in feetGeneral CharacteristicsWeight:
4.0 kg (8.9 pounds)Materials Used:Housing: AluminumOptics: Optical Grade GlassOptical Efficiency:92% (worst case)Provides a constant-deviation device for out-of-squareness measurementStraightness and squareness measurements made with one optical setupIncludes an optical mount that aids alignmentAvailable for use in a variety of Agilent systems, including the Agilent
联系方式