55282A平面度附件 供应安捷伦激光干涉仪选件

The Agilent 55282A Flatness Accessory Kit, when used with the 55281A Angular Optics Kit, allows the 5529A calibration system to perform both flatness and way straightness measurements..描述平面度测量是最繁杂的，从字面意思理解即可，在测量的时候需要完成四条边线和四条对折线共8次测量，使用的是角度的镜子。The Agilent 55282A Flatness Accessory Kit, when used with the 55281A Angular Optics Kit, allows the 5529A calibration system to perform both flatness and way straightness measurements.The 55282A Flatness Accessory Kit is composed of an 10759A Footspacing Kit and two 10773A Flatness Mirrors. The footspacing kit provides three precision baseplates, with 51 mm (2 in), 102 mm (4 in), and 152 mm (6 in) pad spacing respectively, that minimize the grid setup and data accumulation time required for plate calibration. The flatness mirrors provide 100 percent reflectance and turn the direction of an incoming laser beam 90 degrees.The 55282A Flatness Accessory Kit is one component in a family of measurement optics that tailor interferometer systems for the physical layout and measurement requirements of each application. When configured with appropriate laser head and system electronics, the optics are part of a precise positioning or calibration system that improves product quality, increases yields, and facilitates manufacture of precision products.Mirror mounts with swivel-attached baseplate for easier surface plate calibrationFaster measurement and analysis, better accuracy and repeatability than conventional autocollimators and levelsPlate surface holds no heat-producing objectsAvailable for use in a variety of Agilent systems, including the 5529A