潍坊天宏三合一数控围字机

三合一数控弯字机

技术特点(Technical parameters):

1、自动进料、自动开角（45°～135°任意夹角）、自动弯圆弧。（弯弧最小直

径15mm)

2、速度快，一次成型，无需单独制作亚克力盖帽。

3、采用步进电机控制，速度快，围一个30cm大的“S”仅用44秒时间。

4、型材宽度：30～128mm。

5、低耗能，总功率3000W，使用功率不超过1500W。

6、可读取dxf、ai格式的各种矢量文件，与雕刻文件相匹配。

7、外形尺寸:2350×850×1780mm 加工材料:不锈钢、铁皮、铝型材 加工宽度:30mm-128mm 加工厚度:不锈钢304#≤0.8mm/铁皮、铝型材0.4mm-1.2mm

8、特殊规格、要求均可定制。

1.Automatic feed,automatic notch,atomatic bend(Min diameter of bend is 15MM).Automatically cut any angle from 35°to135°.

2.No need to fit the trimcap separately,simplify the fabrication process.

3.High speed,Using the actrating-motor to control machine,it only takes 44 seconds to finish one 30cm letter lik”s”.

4.Available material width ranges from 30mm to 128mm.

5.Energy saving and environmental protection.Total power 700w,actual service power less than 700w.

6.Can read muti-vector file like the formeat such as dxf,ai,matching with the engraving file.

7.Size:2350×850×1780mm Processing materials:stainless steel/iron/aluminum alloy Processing width:30mm-128mm Stainless steel304# less than or equal 0.8 mm iron、aluminum:0.4mm-1.2mm

8.Special speifiaction and requipment is available.